Vertex Scientific And Lab Instruments Co
Vertex Scientific And Lab Instruments Co
Karam Pura, New Delhi, Delhi
SEND SMS
SEND EMAIL

Cement Testing Equipment


Mortar Vibrating Machine

Mortar Vibrating Machine
  • Mortar Vibrating Machine
Ask For Price
Product Price :Get Latest Price

Product Details:

Minimum Order Quantity1 Set
Usage/ApplicationDetermination of compression strength of Cement
MaterialMild Steel,Cast Iron
Max Weight0-200 kg
Automation GradeAutomatic
PhaseSingle Phase
BrandVertex
Voltage220V
FinishingColor Coated
Power SourceElectric
Frequency12000 +/- 400 Vibration Per Minute
Model NumberVSLIC1026
Surface FinishingColor Coating
I deal inNew Only

About Product :
Concrete moulds are easily cast by using a tamping bar or a vibrating table. However air trapped in cement mortar paste can not be thus removed while casting cement mortar moulds. Easy method is to impart greater vibrating of lesser amplitude to the mould while casting This is achieved in a vibrating machine. Vibrating machine is used for the preparing of mortar cubes for the determination of compression strength of ordinary and rapid hardened Portland cement, low heat Portland cement, Portland blast furnace cement and high alumina cements.

Specification :
  • Make : Vertex
  • Phase : Single Phase
  • Weight : 110 kg
  • Frequency : 50Hz
  • Voltage : 220V
  • Capacity : 12000 Cycles per Minute
  • Power Source : Electric
  • Material : Cast iron , Mild Steel

Additional Information :
  • Spares : Set of Springs, Belt and Belt Ground
  • Optional : Digital Preset timer can be supplied at an extra cost.
  • Model Number : VSLIC1026
  • Delivery Time : 1 Week or Depends on the Distance.
Request
Callback


Additional Information:

  • Item Code: VSLIC1026
  • Delivery Time: 1 Week or Depend on the Distance
Yes! I am Interested

Flow Table

Flow Table
  • Flow Table
Ask For Price
Product Price :Get Latest Price

Product Details:

ColorOther
BrandVertex
MaterialMs and Brass
Operation OnHand Operated
Power SupplyManual
Weight15-20 kg.
Surface FinishingPolsihed
Model No.VSLIC-1009
ApplicationThis used for measuring the consistency of pozzolana and also cement mortar and hydrated lime.

About Product :
We offer an extensive range of Flow Table to our customers. These are developed using premium quality material and advanced technology.

Specification: It consists of a machined brass tabletop 250+/- 2.5mm Dia. Mounted on a rigid stand. The table top is reinforced with equally disposed of ribs and allowed to conical brass mould 100mm i.d. top dia and 50mm high.

Accessories: Mild steel plate 25mm thick & 250mm square for fixing to an underside of the base.

Features:

  • Longer life
  • Excellent

Other Details :
  • Product Code: VSLIC-1009
Request
Callback


Additional Information:

  • Item Code: VSLIC-1009
  • Delivery Time: 1 Week
Yes! I am Interested

Rockwell Hardness Tester

Rockwell Hardness Tester
  • Rockwell Hardness Tester
Ask For Price
Product Price :Get Latest Price

Product Details:

Minimum Order Quantity1 Set
BrandVertex
Display TypeAnalog
Model NumberVSLIC7003
Automation GradeAutomatic
Voltage210 V
Frequency50 Hz
PhaseThree Phase
I deal inNew Only
Is It PortablePortable
Power SourceElectric

About Product :
The Hardness Testers have been designed and manufactured strictly conforming to IS. BS, ASTM, ISO and DIN Standards. Since 1966 for most exacting test requirements in the Laboratories and Workshops etc. These testers are designed and manufactured for measuring hardness of metals and alloys of all types, hard or soft, flat, round, tubular or irregular in shape. The testers are simple in design, easy to operate, yet very reliable and accurate.  

Specifications :

Brand : Vertex
Power : Electric
Displaty : Analog
Material : StainlessSteel
Minimum Order quantity : 01
Request
Callback


Additional Information:

  • Item Code: VSLIC7003
  • Delivery Time: 1 Week
Yes! I am Interested

High Pressure Cement Autoclave

High Pressure Cement Autoclave
  • High Pressure Cement Autoclave
Ask For Price
Product Price :Get Latest Price

Product Details:

BrandVertex
ShapeVertical
Power Consumption2600 w
ModelVSLIC-1016
ColorOther Color
Weight55kg Approx
ApplicationLaborartory
Frequency50hz
PhaseSingle Phase
I Deal InNew Only
StandardsASTM C151,C490; UNE 7207

About Product :
The High Pressure Cement Autoclave
is designed to perform expansion tests on cement specimens.10 specimens can simultaneously be tested in the high-pressure steam vessel of 154 mm diameter and 430 mm height.

The Autoclave consists of a pressure gauge, pressure regulator, temperature regülatör, control switches and safety valve. Certified conforming to ISPELS procedure.

 

The Autoclave consists of:

  • Pressure gauge
  • Pressure regulator
  • Temperature regulator
  • Control switches
  • Safety valve
  • Specimen rack - 10 samples capacity

Specifications :
  • Dimensions :450x475x1080 mm
  • Weight : 55kg (approx)
  • Power: 2600 watt

Other Details :
  • Model No. - VSLIC-1016
  • Standards : IS 4031-1968, IS 1624-1960 & ASTM C 151, C 141

Note: Ordinary laboratory cement autoclave with mild steel chambers arealso available.
    Request
    Callback


    Additional Information:

    • Delivery Time: 1 Week
    Yes! I am Interested

    Motorized Flow Table

    Motorized Flow Table
    • Motorized Flow Table
    Ask For Price
    Product Price :Get Latest Price

    Product Details:

    StandardsIS 1199-1959,ASTM C-124,AASHTO-T-120
    Voltage230 V
    BrandVertex
    MaterialSteel and Cast Iron
    Diameter76.2 cm
    Operation OnElectricity
    Power SupplyElectric
    Surface FinishingPolished
    Model No.VSLIC-008

    About Product :
    Fostered with an enormous business understanding of this realm, we are involved in presenting a broad consignment of Motorized Flow Table.

    It is used for determining the flow of cement concrete. Consists of a steel table top 76.2cm ( 30 inches. Dia) Finely machined. The integral cast ribs are designed for support and strength. The stand is fabricated out of cast iron and is of sturdy construction. Holes for mounting in foundations are drilled in the base plate. The ground and hardened steel cam are designed to fit and drop the table by 12.5mm. Electrically operated to raise and drop the table top. Supplied with one conical mould with two handles, 12cm height, having 17cm. Inside Dia. at the Top and 25cm inner dia. at the base.  

     

    Features:

    • Optimum quality
    • Impeccable finish
    • Long lasting nature

    Other Details :
    • Product Code: VSLIC-1008
    • Color: Other
    Request
    Callback


    Additional Information:

    • Item Code: VSLIC-1008
    • Delivery Time: 1 Week
    Yes! I am Interested

    Vertex Motorized Flow Table

    Vertex Motorized Flow Table
    • Vertex Motorized Flow Table
    Ask For Price
    Product Price :Get Latest Price

    Product Details:

    BrandVertex
    Frequency50 Hz
    PhaseThree Phase
    Voltage210 V
    MaterialStainless Steel
    Table Top76.2cm ( 30 inch. Dia)
    Tamping Rod16mm dia x 600mm long
    Surface FinishingPolished
    Power SourceElectric

    About Product :
    We are a foremost organization for providing a diverse grade of Motorized Flow Table to our valued customers. We offer this at nominal costs.It is used for determining the flow of cement concrete. Consists of a steel table top 76.2cm ( 30 inch. Dia) Finely machined. The integral cast ribs are designed for support and strength. The stand is fabricated out of cast iron and is of study construction. Holes for mounting in foundations are drilled in the base plate. The ground and hardened steel cam is designed to fit and drop the table by 12.5mm. Electrically operated to raise and drop the table top. Supplied with one conical mould with two handles, 12cm height, having 17cm. Inside Dia. at the Top and 25cm inner dia. at the base.

    Specifications :

    Power Supply : 230 volts, 50 Cycles, A.C.

    Operation : 15 times in 15 Seconds

    Tamping Rod : 16mm dia x 600mm long

    Table Top : 76.2 cm (30 inch. Dia)

    Request
    Callback


    Additional Information:

    • Item Code: VSLIC1008
    • Delivery Time: 2-3 Days
    Yes! I am Interested

    Heat Of Hydration Apparatus

    Heat Of Hydration Apparatus
    • Heat Of Hydration Apparatus
    Ask For Price
    Product Price :Get Latest Price

    Product Details:

    Minimum Order Quantity1 Set
    Usage/ApplicationDetermine the heat of hydration of cement
    BrandVertex
    Model NumberVSLIC1017
    ColorOther Color
    PhaseSingle Phase
    Frequency50 Hz
    Power SourceElectric
    Voltage210 V
    Body MaterialMetal

    About Product :
    This equipment is required to determine the heat of hydration of cement as expressed in calories per gram.

    Specifications :

    1. A wide mounted double walled vacuum flask with a stop cock 38 mm & a insulating container for the flask
    2. A Beckman thermometer (Range 5° C) held tightly by the cock
    stopper in such a way as to avoid accidental contact with the stirrer blade & the reading lens. To facilitate the easy removal the cock stopper is in two halves.
    3. A constant speed stirrer (double bladed propeller type)extended to within 38 mm from the bottom of the flask.
    4. A funnel (Gooch type) with a stem of 6 mm inner dia & a body approx 25 mm long and 25 mm dia. is fitted to the cock stopper for introducing the sample.

    All the above to combine to form the calorimeter for the determination of heat of hydration of cement.Suitable to operate on 230 V A.C. 50 Hz .
    Request
    Callback


    Additional Information:

    • Item Code: VSLIC1017
    • Delivery Time: 1 Week
    Yes! I am Interested

    Vertex Cube Mould

    Vertex Cube Mould
    • Vertex Cube Mould
    Ask For Price
    Product Price :Get Latest Price

    Product Details:

    Minimum Order Quantity1 Unit
    MaterialMild Steel
    Shaping Mode TypeCube
    Operating ModeManual
    Model NumberVSLIC2024
    ShapeSquare
    Surface FinishingPolished
    WeightApprox 7 Kg
    ColorOther Color
    BrandVertex
    HardnessCast Iron
    Surface FinishColor Coated

    About Product :
    Having a positive quality management system, we are involved in presenting a comprehensive compilation of Cube Mould.
    These are available in different sizes and are made according to Indian and British Standards. For the metric size cube moulds, the faces are machined flat to +/-0.02mm accuracy and finished to within 0.02mm. For the inch size moulds, the faces are machined flat to +/-0.01 inches and finished to within 0.01 in. All moulds are supplied complete with base plate.

    Available Models :

    • VSLIC2024A Cast Iron Mortar Cube Mould 50mm, Single Gang
    • VSLIC2024B Cast Iron Mortar Cube Mould 50mm, Three Gang
    • VSLIC2024C Mild Steel Cement Cube Mould 70.6mm, with Loose Base Plate
    • VSLIC2024D Cast Iron Concrete Mould 75mm Single Gang
    • VSLIC2024E Cast Iron Concrete Mould 100mm Light Weight
    • VSLIC2024F Cast Iron Concrete Mould 100mm Clamp Type (8.5 KG) Four Part
    • VSLIC2024G Cast Iron Concrete Mould 150mm Light Weight 8KG
    • VSLIC2024H Cast Iron Concrete Mould 150mm ISI Marked
    • VSLIC2024I Cast Iron Concrete Mould 150mm Clamp Type (18 KG) Four Part
    • VSLIC2024J Cast Iron Concrete Mould 150mm Clamp Type (16 KG) Two Part

    Features:

    • Precise design
    • Fine finish
    • Durable nature
    Additional Details :
    • Item Code : VSLIC2024
    • Minimum Order : 10 Unit
    Request
    Callback


    Additional Information:

    • Item Code: VSLIC2024
    • Delivery Time: 1 Week
    Yes! I am Interested

    Vicat Needle Apparatus With Dashpot

    Vicat Needle Apparatus With Dashpot
    • Vicat Needle Apparatus With Dashpot
    Ask For Price
    Product Price :Get Latest Price

    Product Details:

    MaterialCast Iron
    BrandVertex
    Weight5-10 Kg
    Usage/ApplicationDetermining the normal cosistency, Standard cosistency and time of setting of cement and Lime
    ColorBlue
    PowerManually Operated
    Packaging TypeStandard packaging
    Surface FinishColor Coated
    Operating ModeManual

    About Product :
    This instrument is used for determining the normal consistency and setting times of cement and ''A'' class limes.

    Specification:

    The apparatus consists of a metallic frame bearing a freely movable and with a cap at top, one vicat mould and glass base plate and one set of needles one each initial needle, final needle and consistency plunger. It comes with a dashpot which facilities gentle lowering of the needles.

    Accessories :
    • Mild steel base plate 5 inches x 5 inches.
    • Fulcrum mould , brass , 80 mm i.d. base dia x 70 mm i.d. top dia , 40 mm height.

    Other Information :
    • Material : Cast Iron
    • Brand : Vertex
    • Power Source : Manually
    • Usage/Application : Determining the normal cosistency, Standard cosistency and time of setting of cement and Lime
    • Color : Blue
    • Weight : 5 Kg
    • Dimensions : 160x200x300 mm
    • Minimum Order Quantity : 1 Unit
    • Product Code : VSLIC1004


    Note:
    1) Normally set of needles and mould which meet isrequirements as per I.S. 5513 are supplied. While ordering please specify the specification code of theinstrument required.
    2) Vicat needle apparatus for determining consistency of hydraulic cement. Gypsum plaster, lime etc.

    As per ASTM C 187-58 C 472-62 C 110-58, IS 2542 (Part-1) can also be supplied.
    Request
    Callback


    Additional Information:

    • Item Code: VSLIC1004
    • Delivery Time: 1 Week or Depend on the Distance
    Yes! I am Interested

    Digital Blaine Air Permeability Apparatus

    Digital Blaine Air Permeability Apparatus
    • Digital Blaine Air Permeability Apparatus
    Ask For Price
    Product Price :Get Latest Price

    Product Details:

    BrandVertex
    Model Number/NameVSLIC-1003
    Voltage220 V
    Power25 W
    Frequency50 Hz
    Weight8 kg Approx
    Display TypeDigital
    Thickness of Disk1.0 mm

    Digital Blaine air permeability apparatus with automated test cycle, electric suction pump, photoelectric cells for detection of levels, chronometer start-up and stop.
    After the test, the automatic display of the time measured.
    Precision of time displayed: 0.01 second.
    The apparatus is delivered complete with: Stainless steel cell with grid and plunger, bottle of manometric liquid, bag of 1000 filter paper disks, funnel.

    Specifications:
    • Inside diameter of permeability cell φ12.7mm
    • Height of sample in the cell 15mm
    • Perforated disk 35
    • Diameter of the hole φ1.0mm

    Additional Information:
    • Dimensions: 300x250x510 mm
    • Standards: ASTM C204
    Request
    Callback


    Additional Information:

    • Item Code: VSLIC-1003
    • Delivery Time: 1 Week
    Yes! I am Interested

    Vicat Appartus

    Vicat Appartus
    • Vicat Appartus
    Ask For Price
    Product Price :Get Latest Price

    Product Details:

    Minimum Order Quantity1 Set
    Usage/ApplicationThis instrument is used for determining the normal consistency and setting times of cement and 'A' c,used for determining the normal consistency and setting times of cement and 'A' class limes.
    BrandVertex
    MaterialSteel
    Model NumberVSLIC-3004
    Automation TypeManual
    ColorBlue
    Final Needle Diameter1.13 mm
    Consistency Plunger Diameter10 mm
    Automation GradeManual

    For determining the liquid limit of soils. This is specially useful to obtain reliable and accurate results of those soil which have low plasticity index. The percentage moisture contents determined when cone with half angle of 15-30 minutes under a total sliding weight of 148 gm penetrates 25mm gives the liquid limit.

    Request
    Callback


    Additional Information:

    • Item Code: VSLIC-3004
    • Delivery Time: 1 Week or Depend on the Distance
    Yes! I am Interested

    Core Drilling Machine

    Core Drilling Machine
    • Core Drilling Machine
    Ask For Price
    Product Price :Get Latest Price

    Product Details:

    BrandVertex
    Model Name/NumberCore Drilling Machine
    Automation GradeAutomatic
    Number Of Shaft3
    Hole Diameter0-25 mm
    Max SpeedCustomize
    OperationCustomize
    WeightCustomize
    TorqueCustomize

    A cement core drill is a drill specifically designed to remove a cylinder of material, much like a hole saw. The material left inside the drill bit is referred to as the core. Core drills used in metal are called annular cutters. … For drilling masonry, carbide core drills can be used.

    Product Features

    • Heavy duty, pillar type frame with 1500W.
    • Varying cutting feeds provided with winter-fed swivel head which can be connected to suitable water supply.
    • Provision at base for water collection/drainage.
    • Core preparation from regular and irregular samples and core size: EX to 100mm.
    • Clamping arrangement to hold specimens with regular / irregular shapes to the base of machines.
    • Two cutting speeds at no load 950/2100RPM.
    • Water tank 5ltr. IS standard outfit.

    Technical specifications

    • Coring angle: 0 to 360°
    • Rack feed: 1000 mm.
    • Shaft thread: 1¼-7.
    • Power: 2200 W at 230 V; 1800 W at 110 V.
    • Full load speed: 670/1140/1580 r.p.m.
    • Coring range dia.: 20/200 mm.
    • Dimensions approx.: 470x785x1630 mm.
    • Weight approx.: 80 kg.
    Request
    Callback
    Yes! I am Interested

    Shrinkage Mould-Two Gang

    Shrinkage Mould-Two Gang
    • Shrinkage Mould-Two Gang
    Ask For Price
    Product Price :Get Latest Price

    Product Details:

    ShapeRectangle Shaped
    Usage/ApplicationConstruction Laboratory
    BrandVertex
    Capacity20-30 ton/day
    TypeCustomize
    ColorAny
    MaterialCustomize

    This Shrinkage Bar Mould-Two Gang is used for determination of soundness. The change in length of the specimen is determined by Length Comparator listed in the concrete section. Two models are offered. One is provided with stainless steel smooth reference points while the other is provided with knurled and threaded reference points. Both the models are available as single mould and multiple mould compartments. Each mould is supplied complete with base plate and two reference points per compartment of mould.
    Technical Specifications
    Automation Grade Manual
    Usage Cement Testing
    Condition New
    Cutting Die Yes
    Product Customization Yes
    Assembly Required Yes
    Rust Resistance Yes
    Is It Water Resistance Non Water Resistance
    Request
    Callback
    Yes! I am Interested

    Shrinkage Bar Mould-Single

    Shrinkage Bar Mould-Single
    • Shrinkage Bar Mould-Single
    Ask For Price
    Product Price :Get Latest Price

    Product Details:

    ShapeRectangle Shaped
    Usage/ApplicationConstruction Laboratory
    BrandVertex
    Capacity20-30 ton/day
    TypeCustomize
    ColorCustomize
    MaterialCustomize

    The mould, which has 25mm x 25mm x 250 mm effective gauge length is made of mild steel and has accurately machined faces. The parts of the moulds are tight-fitting and firmly held together when assembled.
    Request
    Callback
    Yes! I am Interested

    Vibrating Table (Open Body )

    Vibrating Table (Open Body )
    • Vibrating Table (Open Body )
    Ask For Price
    Product Price :Get Latest Price

    Product Details:

    Usage/ApplicationConstruction
    Model Name/NumberVibrating Table (open body )
    MaterialIron
    Automation GradeSemi-Automatic
    I Deal InNew Only
    BrandVertex

    Vibrating Table(open body).It is designed to carry a load of 140 kg. The apparatus consists of a motor fitted with a variable pitch pulley housed in a cabinet.

    The Vibrating Table Proper compaction of cement concrete while casting specimens for compression testing is essential to achieve higher compressive strength. Vertex Vibrating Table is ideally suited for this purpose.

    The table top is suitable to hold cube moulds and has stops along its edges to prevent moulds from sliding off the table during operation. The specially designed vi bro motor for operating the vibrator.

    Table top size : 750 x 750 mm 1000 x 1000 mm also available at an extra cost. Both models operates on 440 volts, A.C. Three Phase

    Models available:

    • Vibrating Table,Table top 75cm x 75cm for 6 moulds of 150mm cube
    • Vibrating Table,Table top 50 x 50cm for 4 moulds of 150mm cube
    • Vibrating Table,Table top 2m x 1m for 32 moulds of 150mm cube
    • Vibrating Table,Table top 1m x 1m for 16 moulds of 150mm cube
    Request
    Callback
    Yes! I am Interested

    Cement Samplers

    Cement Samplers
    • Cement Samplers
    Ask For Price
    Product Price :Get Latest Price

    Product Details:

    Usage/ApplicationConstruction Laboratory
    Model Name/NumberCement Samplers
    MaterialMild Steel
    CapacityCustomize
    Type Of Testing MachinesPowder Dynamometer
    VoltageCustomize
    ColorWhite
    Packaging TypeWooden Box
    Display TypeDigital

    This is a brass tube approximately 53cm long and 2.8cm I.D. with a wooden handle. The total length of approximately 73cm. The tube has a sharp angular edge which conveniently pierces cement bags. An air hole of approximately 3mm dia is drilled on the tube near the handle. The total sample collected at one time is 300 cm approximately.
    Features
    • The Vertex Packaged Cement Tube Sampler is made of brass and used for collecting cement samples from packages.
    • The Vertex Bulk Cement Sampler is used to collect cement samples from bulk storage or bulk shipments.
    • The sampler consists of 2 brass concentric tubes and each tube has slots.
    • The inner tube rotates to close the slots and take the sample.
    Request
    Callback
    Yes! I am Interested

    Ultra Low Temperature Cabinet

    Ultra Low Temperature Cabinet
    • Ultra Low Temperature Cabinet
    Ask For Price
    Product Price :Get Latest Price

    Product Details:

    BrandVertex
    Model Name/NumberUltra Low Temperature Cabinet
    Usage/ApplicationConstruction Laboratory
    SizeCustomize
    MaterialCustomize
    FeaturesCustomize
    Ambient Temperature Deg CelsiusCustomize

    vertex presenting you the ultra-high-tech Microprocessor controlled, solid-state Low-Temperature Cabinet (Horizontal / Vertical Models) micro control with CFC free refrigeration system to meet various standard applications in diverse industrial applications such as medical, bio-chemical and research laboratories.
    Features
    • Heavy duty product
    • Durability
    • Optimum performance
    Request
    Callback
    Yes! I am Interested

    Le Chatelier Mould

    Le Chatelier Mould
    • Le Chatelier Mould
    Ask For Price
    Product Price :Get Latest Price

    Product Details:

    BrandVertex
    Usage/ApplicationConstruction Laboratory
    MaterialCustomize
    AccessoriesCustomize
    HeightCustomize
    Production CapacityCustomize

    It is used for the determination of soundness by expansion method of ordinary and rapid hardening Portland cement, low heat Portland cement and class ‘A’ Limes.
    • It consists of a small split cylinder forming a mould of 30mm internal dia. and 30mm high. On either side of split cylinder, two parallel indicating arms with pointed end are fixed.
    • Two loops of suitable material and strength material and strength soldered to the upper half of the central split is provided to facilitate demoulding of the hardened paste specimen after test.
    • The resilience of the mould shall be such that the action of a mass of 300g applied shall increase the distance between the indicator ends of the needle by 17.5mm + 2.5mm without permanent deformation.
    • The mould is supplied complete with two glass plates and lead weight. 
    Features
    • It consists of a small split cylinder forming a mould.
    • On either side of the split cylinder.
    • Two parallel indicating arms with pointed ends are attached.
    • Supplied complete with two glass plates and a lead weight.
    Request
    Callback
    Yes! I am Interested

    Gillmore Needle Apparatus

    Gillmore Needle Apparatus
    • Gillmore Needle Apparatus
    Ask For Price
    Product Price :Get Latest Price

    Product Details:

    BrandVertex
    MaterialSS and Brass
    Automation TypeManual
    Model NumberVSLIC-1006
    Product CodeVSLIC-1006

    Used to determine initial and final set times of Portland cement, masonry cement, hydraulic hydrated lime and certain mortars.

    Specification:
    • The vertical support shaft has a device to maintain the horizontal arms in alignment. The support assembly is adjustable. The two steel needle weights are calibrated to meet specifications. The needle points are manufactured from stainless steel. The initial setting needle is 2.12mm in diameter and weighs 113 grams. The final setting needle is 1.06mm in diameter and weighs 453.6 grams.

    Additonal Specification:
    • Standard: ASTM C 266,AASHTO T 154,ASTM C91,ASTM C266,ASTM C414,ASTM C150
    • Initial Setting Needle Diameter : 2.12 nm
    • Intial Setting Needle Weight : 113 gram
    • final Setting Needle Diameter : 1.06 mm
    • Final Setting Needle Weight : 453.6 gram
    Request
    Callback


    Additional Information:

    • Item Code: VSLIC-1006
    • Delivery Time: 1 Week
    Yes! I am Interested

    Gauging Trowel

    Gauging Trowel
    • Gauging Trowel
    Ask For Price
    Product Price :Get Latest Price

    Product Details:

    Handle MaterialHard Wood
    BrandVertex
    WeightApprox 210 g
    Model Number/NameVSLIC-1027
    StandardsBS 12,IS 4031

    The Gauging Trowel is a versatile tool used for transferring plaster (the broad rounded point is ideal for picking plaster out of a bucket) and for applying plaster to a wall or surface. Use this trowel for mixing or "gauging" small quantities of plaster.


    Features:
    • Low maintenance

    • Resistance against corrosion

    • Compact designs

    • Light weight

    Specifications:
    • Weight approximately 210 gm
    • Best quality with hardwood handle Blade length approx 200 mm
    Other Details :
    • Standards : BS 12, IS 4031
    • Item Code : VSLIC-1027
    Request
    Callback


    Additional Information:

    • Item Code: VSLIC-1027
    • Delivery Time: 1 Week
    Yes! I am Interested

    Motorised Cement Flow Table

    Motorised Cement Flow Table
    • Motorised Cement Flow Table
    Ask For Price
    Product Price :Get Latest Price

    Product Details:

    Size/Dimension450 x 1030 x 330 mm
    BrandVertex
    Power Supply180w
    Weightapprox. 50kg
    StandardVSLIC-1010

    About Product:
    • Used for determining consistency of mortar, lime and cement specimens. Manual and motorised models are available.
    • The table is 254mm dia., 12,7mm drop height. The cone made of brass has dimensions of
    • 101,6mm base dia. x 69,9mm top dia. x 50,8mm high.
    • The motor operated model is driven by a motor speed reducer through a mechanical coupling at the rate of 1 rev. per second. The number of drops is pre-set on a counter and the machine stops automatically at the end of the cycle.
    • Supplied complete with brass flow mould and tamper. The table and mould are manufactured from stainless steel.

    Specifications:
    • Motorised Models
    • Automatic Drop Count
    • Complete with Brass Mould & Tamper

    Other Details:
    • Standards: IS 5512 & BS 4551-1
    Request
    Callback


    Additional Information:

    • Item Code: VSLIC-1010
    • Delivery Time: 1 Week
    Yes! I am Interested

    Cement Tensile Testing Machine

    Cement Tensile Testing Machine
    • Cement Tensile Testing Machine
    Ask For Price
    Product Price :Get Latest Price

    Product Details:

    Usage/ApplicationLaboratory
    Capacity900kg
    BrandVertex
    Operating ModeSemi-Automatic
    Model Name/NumberCement Tensile Testing Machine

    Vertex Cement Tensile Testing Machine is Basically used to determine the tensile strength of briquette specimens of cement. It can also be used to test the flexure strength of the sample. This test is commonly used by Cement Manufacturers in order to determine the quality of cement.
    This is Cement Tensile Testing Machine. The instrument employs a friction-free, accurate, double lever system, the load being applied by means of sliding weight on the top lever. The capacity of the unit is 900 kgs.
    Request
    Callback
    Yes! I am Interested

    Jolting Apparatus

    Jolting Apparatus
    • Jolting Apparatus
    Ask For Price
    Product Price :Get Latest Price

    Product Details:

    Usage/ApplicationConstruction Laboratory
    BrandVertex
    Model Name/Numberjolting Apparatus
    Capacity15kg Per Hour
    ColorBlue

    Vertex Jolting apparatus consists of a rectangular table, rigidly connected by two support arms to the spindle at a horizontal distance of 800 mm from the center of the table. The table can be raised and allowed to fall freely by a cam which is connected to a motor. The cam rotates at a rate of 60 rpm. A digital counter with a sensor is provided, which stops the machine after 60 jolts. Locating pins are provided for mounting the mould compartments on the table. The mould, surrounded by the hopper, can be clamped rigidly to the table. Supplied complete with mould and hopper. Suitable for operation 220V, 50 cycles, Single phase, AC supply.
    Technical Specifications
    Power Source Electric
    Condition New
    Automatic Grade Manual, Semi-Automatic
    Voltage(V) 220
    Power Consumption 1 kw
    Capacity (kilogram per hour) 15
    Certification ISO 9001 2008, CE
    Design Type Standard
    Size Costomized
    Power (HP) 1 HP
    Request
    Callback
    Yes! I am Interested

    Mortar Cube Vibrating Machine

    Mortar Cube Vibrating Machine
    • Mortar Cube Vibrating Machine
    Ask For Price
    Product Price :Get Latest Price

    Product Details:

    Usage/ApplicationCement Testing Machine
    Driven TypeMotor
    Automation GradeSemi-Automatic
    BrandVertex
    I Deal InNew Only

    Mortar Cube Vibrating Machine consists of a vibrating frame assembly and an electric motor mounted on a sturdy base. The complete frame assembly consists of a vice to hold a 70.6 mm cube mould and two studs threaded at top and a hopper to feed the sample in the mould.
    Concrete mould are easily cast by using a tamping bar or a vibrating table. However air trapped in cement mortar paste can not be thus removed while casting cement mortar mould. Easy method is to impart greater vibrating of lesser amplitude to the mould while casting This is achieved in a vibrating machine. Mortar Vibrating machine is used for the preparing of mortar cubes for the determination of compression strength of ordinary and rapid hardened Portland cement, low heat Portland cement, Portland blast furnace cement and high alumina cements.
    Technial Specifications
    • The machine consists of a vibrating frame assembly and an electric motor mounted on a sturdy base.
    • The complete frame assembly consists of a vice to hold a 70.6 mm cube mould and two studs threaded at top and a hopper to feed the sample in the mould.
    • This assembly is supported on four springs and has an in built rotating shaft which rotates eccentrically and thus imparts vibrations to the entire frame.
    • A balance weight is an integral bottom part of the frame.
    • The centre of gravity of the assembly is brought to the centre of the eccentric shaft within a distance of 25 mm below it.
    • The electric motor drives the shaft of the frame and thus imparts required vibration to the moulds.
    • The frequency of vibration is 12000 +/- 400 Vibration Per Minute.
    • Supplied complete with on 70.6 mm Cube Mould with loose base plate, a time switch 0-5mins x 1mm.
    Request
    Callback
    Yes! I am Interested

    Vicat Needle Test Apparatus Automatic Recording

    Vicat Needle Test Apparatus Automatic Recording
    • Vicat Needle Test Apparatus Automatic Recording
    Ask For Price
    Product Price :Get Latest Price

    Product Details:

    Minimum Order Quantity1 Unit
    Voltage230 V
    Frequency50 Hz
    PhaseSingle Phase
    Power SourceElectric

    The Vicat apparatus is designed and manufactured using the most recent and sophisticated technology, is used for the initial and final setting time determination of types of cement or mortar pastes.
    The unit is manufactured with anticorrosion and tropicalized components to be used in places with humidity, not below 90% and 20°C. controlled temperature as required by EN Specifications.
    The entire test is made in a fully automatic way and gives a very precise and repeatable result.

    The results are printed on the incorporated printer and this eliminates the manual operations of installing and zeroing the paper graph on the drum.Automatic Vicat Needle Vicatronics.

    Features:

    • Precise design
    • Durable
    • Minimal maintenance
    Request
    Callback
    Yes! I am Interested

    Le Chatelier Flask

    Le Chatelier Flask
    • Le Chatelier Flask
    Ask For Price
    Product Price :Get Latest Price

    Product Details:

    ShapeCylindrical
    BrandVertex
    Length1.5 Feet
    Operating ModeManual

    Standards: IS 4031 1968, ASTM C 188

    Specification:

    Used for finding specific gravity of hydraulic cement. Made from Borosilicate glass. The flask is 243mm in total height, having a bulb of 90mm dia of 250ml approximate capacity. The long neck of the flask has at top a funnel of 50mm dia in that fits a ground glass stopper. The neck has over-all 11mm i.d. upper portion is graduated from 18ml to 24ml with 1 ml graduation. Just at the bottom of the neck 1 ml capacity is marked in between there is 17 ml capacity bulb.

    Request
    Callback


    Additional Information:

    • Item Code: VSLIC-1012
    • Delivery Time: 1 Week
    Yes! I am Interested

    Humidifier

    Humidifier
    • Humidifier
    Ask For Price
    Product Price :Get Latest Price

    Product Details:

    Usage/ApplicationConstruction Laboratory
    BrandVertex
    ColorGrey
    Star Rating5 Star

    vertex introducing a Humidifier solution based on rotating disc splash plate principal and produces only particles of micron size that become part of the atmosphere, thus reaching in every corner of a room and as resultant providing uniform humidity conditions.
    Features
    • No increase in heat load of space.
    • May offset cooling load, particularly in the shoulder season.
    • Can be configured and accessed near floor-level for operation, inspection, and maintenance.
    • Packaged controls and appurtenances.
    • Utilize existing fan and heating systems for distribution and reheat.
    • No interference with space layout.
    Request
    Callback
    Yes! I am Interested
    X

    Explore more products



    Reach Us
    Anshul Johri (Founder)
    A223, Ground Floor Near By Bank Baroda
    Karam Pura, New Delhi- 110015, Delhi, India



    Call Us


    Send E-mailSend SMS