- Home
- ยป
- Products & Services
- »
- Soil Testing Instruments
Soil Testing Instruments
In all sections of civil engineering and particularly in soil mechanics, the engineer during the design stage must ensure that the analysis of soil properties relate directly to the relevant foundation or structure.
When highway or railway earthworks, bases, sub bases and dams are constructed and sub grades are prepared, it is necessary to determine the compatibility properties of the material. Every man-made structure needs a foundation that will resist to the exposed forces, such as live loads, dead loads and wind loads.
The soil tests provide the engineering firms and construction companies with the ability to predict the mechanical behavior of soils in order to design foundations that ensure resistance to forces likely to act upon it, including any unusual / extreme events such as earthquakes or hurricanes, thus providing a safe environment for people in or around the structures.
For several decades, national standards have governed over the production of these binders and have led, in each single producing country, to a high level of diversification.
visit our official website: www.vertexinstruments.com | www.vertexmfg.com

Hot Air Oven
Minimum Order Quantity: 1 Set
Power Source | Electricity |
Packaging Type | Standard Packaging |
Brand | Vertex |
Type | Hot Air |
Size | 18x18x18 |
Model Number/Name | VSLIC9013 |
Material | Mild Steel |
Body Material | Mild Steel,Stainless Steel |
Display Type | Digital |
Condition | New |
Automation Grade | Automatic |
Power | 250 |
Delivery Time | 2 days |
No. Of Trays | 2 |
Phase | 230 V AC Single Phase or 440 V AC Three Phase |
I deal in | New Only |
Determination of effect of aging on various physical properties of different materials may be carried out by heating the material under test inside an air oven so that the effects of long term aging is reproduced within a much shorter duration of time .for this determination, physical properties of the material under test are determined before aging and aging the test specimen at the specified temperature for a set duration of time and subsequent to the room temperature before conducting the tests again. Determination of various physical characteristics of different materials and products at the elevated temperature may be carried out by heating the test specimen to the appropriate the temperature inside a constant temperature air oven and determining the required characteristics of the specimen kept at the same temperature. For this purpose, the equipment needed for conducting the determination can either be kept inside the oven along with the test specimen or if this is not feasible because of certain constraints, by taken the heated specimen out from the oven and conduction the test in the still air within the shortest possible span of time. The Asian hot air Oven has a test chamber of double walled construction. The inner walls are made of stainless steel sheet and outer walls of CRCA sheet. The space between the two walls is filled with mineral wool for insulation. The chamber is fitted with two adjustable perforated shelves for keeping the test specimen or the test equipment on. The oven is heated electrically with the help of heaters placed in ribs on the bottom and sides of the chamber. (An air circulating fan is provided on the back of the chamber for even temperature distribution) the temperature inside the test chamber is indicated and controlled by the digital temperature controller. The chamber is provided with two ports with adjustable openings for enabling natural change of air inside it by convection. These ports can also be used for providing electrical access to the test specimen kept inside the oven if so desired.
Specifications :
- No. of Trays : 2
- Display : Digital
- Material : Stainless steel, Mild Steel
- Power Source : Electrical
- Type : Hot Air
Additional Information:
- Item Code: VSLIC9013
- Delivery Time: 1 Week
Sieve Shaker Motorised
Usage/Application | Construction Laboratory |
Brand | Vertex |
Material | Cast Iron |
Model Name/Number | VSLIC-S196 |
Features | The whole construction is of cast iron |
Automation Type | Semi-Automatic |
Country of Origin | Made in India |
Technical Specifications
- Carrying up to 7 to 8 Sieves of 200mm diameter Sieves.
- The Shaker is driven by HP motor through a reduction gear immersed in oil. The sieve table dies not to rotate but is inclined from the vertical axis and the Direction of inclination changes progressively in a clockwise direction.
- If the stop pin below the table is removed.
- The shaker can have a rotary motion.
- There is a pair of rods and a holder are supplied.
- The holder can be fixed on the top of the upper cycles.
- Sizes: 200mm, 300mm, 450mm dia.
Additional Information:
- Item Code: VSLIC-S196
Plastic Limit Set
Minimum Order Quantity: 1 Set
Material | Plastic |
Automation Grade | Manual |
Brand | Vertex |
Model Number | VSLIC-S171 |
I deal in | New Only |
Standards | IS 2720 (PART-VII) ASTM D-42,BS 1377 AASHTO T 90 |
Moisture contents at which soil has the smallest plasticity is called limit. For determination purpose plastic limit is defined as the water content at which a soil will just begin to crumble when rolled into a thread of 3mm Dia.
Product Specification:-
The complete set consists of one each :
1. Glass plate 20cm x 15cm having round ends
2. Brass or stainless steel rod 3mm Dia x 150mm long
3. Flexible spatula 15 cm
4. Set of 6 moisture containers
5. Porcelain basin 150mm Dia
6. Plastic wash bottle 500ml
Note:- Glass Plate size 500 x 500 x 10mm can be supplied at an extra cost.
Other Details:
- Item Code: VSLIC-S171
- Minimum Order Quantity: 01 Set
Additional Information:
- Item Code: VSLIC-S171
- Delivery Time: 1 Week
Sand Replacement Apparatus
Automation Grade | Manual |
Color | Blue |
Model Name/Number | VSLIC-S191 |
Brand | Vertex |
Country of Origin | Made in India |
Base Shape | Square |
With prosperous industry practice, we are known to offer Sand Replacement Apparatus. It is made by experts using advanced technology. The Sand Replacement apparatus is used for the determination of the degree of compaction on site. The Complete set consists of a pouring cylinder, calibration container and tray. The sand pouring cylinder is made of cast aluminium and precisely machined; the calibration container and tray are made of plated sheet steel. The test set is available in three different sizes.
Features:
- Supreme quality
- Exceptional standards
- Fine finish
Additional Information:
- Item Code: VSLIC-S191
Methylene Blue Test Set
Minimum Order Quantity: 1 Set
Material | Mild Steel |
Automation Grade | Semi-Automatic |
Usage/Application | The Test Set is used for determining the Methylene Blue value of 0/2 mm fraction in fine aggregates. |
Weight | Approx 13kg. |
Brand | Vertex |
Dimension | 500x5870x270 mm |
Model Number | VSLIC-S166 |
Power | Electric |
I deal in | New Only |
Standards | EN 933-9; NF P94-068; UNE 83 180; UNI 8520-15 |
About Product :
The Test Set is used for determining the Methylene Blue value of 0/2 mm fraction in fine aggregates.
Specification: Set consists of -
- High-speed agitator motor, 400/600 r.p.m.
- Stirring propeller, ø 70 mm 4 flanks
- Glass burette, 50 ml x 0.1 ml
- Burette holder and stand
- Filter paper, 1 pack (100 pcs.), 125 mm dia, 95 g/m2, 0.20 mm thickness
- Glass rod, ø 8x300 mm
- Plastic beaker, 1000 ml
- Methylene blue, 100 g
- Kaolinite, 500 g
- Standards: EN 933-9; NF P94-068; UNE 83 180; UNI 8520-15
- ProductCode : VSLIC-C166
Additional Information:
- Item Code: VSLIC-S166
- Pay Mode Terms: Other
- Delivery Time: 1 Week
Semi Automatic Cone Penetrometer
Weight | 3kg |
Usage/Application | Used to determine the moisture content at which clay soils pass from a plastic to a liquid state. |
Power | Electric |
Model Number | VSLIC-S192 |
Automation Grade | Automatic |
Brand | Vertex |
Material | Stainless Steel |
Display | Digital |
Vertex Semi Automatic Cone Penetrometer is soil testing lab equipment that is used to identify the moisture content in which the clay soil transfers into a liquid state from the normal solid state.
Product Specification:
Used to determine the moisture content at which clay soils pass from a plastic to a liquid state. Two Version are available. One the standard one the other is semi-automatic with a timer where the cone is allowed to free fall for a period of 5 seconds including one each of 50 gm. 100 gm.weight, one penetration cone, preset counter measuring cup.
Additional Information:
- Item Code: VSLIC-S192
- Minimum Order Quantity: 01 Set
Additional Information:
- Item Code: VSLIC-3005
- Delivery Time: 1 Week
Liquid Limit Device with Counter
Material | Brass |
Brand | VERTEX |
Model Name/Number | VSLIC-S164 |
Pressure | 10 Kg/sqcm |
Chord Height | 27 mm |
Width | 13.3 mm |
Soil Strength | 0.17N/cm. sq |
Casagrande method in mechanical form is known as liquid limit method and has been in use for soil mechanics for a number of decades. The liquid limit data of soils is useful to correlate mechanical properties of soil, such as compressibility and lower shear strength. Liquid limit is the water content at which soil passes from zero strength to an infinite strength, hence the true value of liquid limit cannot be determined.For determination purpose liquid limit is that water content at which a part of soil, cut by a groove of standard dimensions, will flow together for a distance of 1.25cm under an impact of 25 blows in a standard liquid limit apparatus. The soil at the water content has some strength which is about0.17N/cm. sq. (17gms/sq.cm.) . At this water content soil just passes from liquid state to plastic state.
It consists on a brass cup held on an adjustable bracket.
The cup can be adjusted for a fall of 1 cm and can be raised an dropped on a rubber base of standard hardness by cam action. Complete with one Casagrande grooving tool, one ASTM grooving tool and a height gauge block. A counter to register the number of blows.
Additional Information:
- Item Code: VSLIC-3006
- Minimum Order Quantity: 01 Set
Additional Information:
- Item Code: VSLIC-S164
Gyratory Sieve Shaker
Voltage | 240 V |
Model Name/Number | VSLIC-S195 |
Frequency | 50 Hz |
Power | 2.5 kW |
Country of Origin | Made in India |
Power Source | Electric |
Additional Information:
- Item Code: VSLIC-S195
Vibratory Sieve Shaker
Usage/Application | Construction Laboratory |
Brand | Vertex |
Model Name/Number | VSLIC-S197 |
Features | Long working life. |
Automation Type | Automatic |
Country of Origin | Made in India |
Features
- Application specific design.
- Long working life.
- High efficiency.
Shrinkage Limit Set
Minimum Order Quantity: 1 Set
Automation Grade | Manual |
Color | White |
Brand | Vertex |
Material | Plastic |
Model Number | VSLIC-S193 |
Specifications :
Shrinkage limit is the maximum water content at which a reduction in water content does not cause an appreciable reduction in the volume of the Soil Mass. At shrinkage limit, on further reduction in water, air enters into the voids of soils and thus keeps the volume constant. The apparatus can be used to determine shrinkage limit and to calculate other shrinkage ratios, shrinkage index, and volumetric shrinkage. Set consists of one each:1. Porcelain evaporating dish2. Shrinkage dish3. Glass cup4. Perspex plate with three metal prongs5. Flexible spatula 100mm6. Glass cylinder7. 25ml x 1ml, supplied without mercury6. Plastic wash bottle 500ml
Optional Accessories:
Mercury supplied in a bottle of 500 gms. at an extra cost.
Additional Information:
- Item Code: VSLIC-S193
- Minimum Order Quantity: 01 Set
Additional Information:
- Item Code: VSLIC-S193
- Delivery Time: 1 Week
Grain Size Analysis (Pipette Method)
Minimum Order Quantity: 1 Set
Automation Grade | Manual |
Brand | Vertex |
Model Number | VSLIC-S143 |
Material | Steel |
This is for the determination of the sub-sieve particle distribution in a soil sample by mechanical analysis. An analysis of this kind expresses quantity the proportions by weight of the various sizes of particles present in the soil. It is recommended as a standard procedure to use a dispersion agent to avoid flocculation. The apparatus consists of a sliding panel which moves up and down by means of a screw allowing Anderson pipette fixed to it to be raised or lowered vertically. A sedimentation tube is held by a laboratory clamp provided on the stand below the pipette. The depth of immersion is measured by a scale graduated in mm at the side of the sliding panel. Supplied complete with Anderson pipette10ml. At the side capacity made from glass, and a sedimentation tube also of glass of 500ml capacity and 50nos. Test form pads.
Accessories Spares: (on extra cost)
1) Sedimentation Pipette (Anderson pipette) 25ml.
2) Sedimentation tube 100ml
3) Sedimentation pipette 10ml
4) Sedimentation tube 500ml
5) Test forms pad of 50VSLIC3009 GRAIN SIZE ANALYSIS (PIPETTE METHOD)
Additional Information:
- Item Code: VSLIC-S143
- Minimum Order Quantity: 01 Piece
Additional Information:
- Item Code: VSLIC-S143
- Delivery Time: 1 Week
Relative Density Test
Minimum Order Quantity: 1 Set
Automation Grade | Manual |
Color | Blue |
Brand | Vertex |
Model Number | VSLIC-S185 |
About Product:
The equipment is used for the determination of the relative density of cohesionless free draining soils and meets the essential requirements.
Product Specification:
The equipment consists one each of Vibratory table, with a cushioned steel vibrating decks about 75cm x 75cm. It has a frequency of approximately 3600 vibratory table, minute under a11.5kg load. Amplitude is variable in between0.65mm in step of 0.05 to 0.25mm, 0.25 to 0.45 mm and 0.45 to 0.65mm. Suitable for operations on415V, Three Phase supply. Cylindrical metal unit weight mould, 3000ml capacity. Guide sleeve with clamp assembly. Surcharges base plate for mould. Handle for surcharge base plate. Surcharge weight.
The total weight together with surcharge base plate and handle is equipment to 140 kg. / cm2. For mould. Cylindrical metal unit weight mould 15000 ml.capacity. (Total weight together with the above mould surcharge weight is equivalent to 140 kg./ cm2) dial gauge 0.01mm x 50mm travel. Extension piece 25mmfor dial gauge.
Additional Information:
- Item Code: VSLIC-S185
- Minimum Order Quantity: 01 Set
- Standards: ASTM D4253 (Method 1A—1B)
Additional Information:
- Item Code: VSLIC-S185
- Delivery Time: 1 Week
Static Cone Penetrometer Capacity 100Kn (10,000kgf) (Diesel Engine Driven)
Minimum Order Quantity: 1 Set
Brand | VERTEX |
Model Name/Number | VSLIC-S104 |
IS 4968 (PART III)
For reaching greater depths and to facilitate easy and constant rate of penetration 1 to 2.5cm/sec of the cone this engine-driven Static Cone Penetrometer of 100 KN (10,000 Kgf) capacity is preferable. The equipment consists of a hydraulic pump driven by a Diesel Engine. The whole system is mounted on a tow able trolley fitted with pneumatic wheels. The pumping unit and ram are connected by means of flexible pipes through a direction control valve. The hydraulic ram moves on a two pillar stand mounted on a trolley.
Following accessories comes with machine.
- Penetration Cone, steel 60 cone angle, 10cm2 base area, with friction jacket One
- Mantle Tube, 36mm uniform OD with sounding Rod working length 1 m Thirty
- Load Measuring Head, with Automatic cut-off valve, and oil can without pressure gauges. One
- Pressure Gauge, 0-600 x 5 kg/cm One
- Pressure Gauge, 0 100 x 1kg/cm One
- Trusses Two
- Screw Anchor 45 cm Six
- Screw Anchor 30 cm Six
- Screw Anchor 20 cm Six
- Screw Anchor Rod with cone Six
- Driving handle for Screw Anchor One
- Extension Pipe for Handle Four
- Clamping Screw with Nuts Six
- Extractor Tube with Connector One
- Tarpaulin Cover One
Additional Information:
- Item Code: VSLIC-S104
- Production Capacity: 100kN
- Delivery Time: 15-20
- Packaging Details: Wooden Pacakaging
Unconfined Compression Test Apparatus
Minimum Order Quantity: 1 Set
Brand | Vertex |
Automation Grade | Manual |
Material | Metal |
Color | Other Color |
Weight | 10-12 Kg |
Model Number | VSLIC-S215 |
Packaging Type | Wooden Packaging |
Is It Portable | Non Portable |
I deal in | New Only |
Standards | 2720 (Part 10), AASHTO T208 |
Operating Mode | Manual |
Determination of soil shear strength is essential for designing the foundation of structures, soil and soil retaining structures, soil slopes, etc., Shear strength of soil depends on various factors and in situ soil conditions. Therefore, when laboratory tests in the soil are performed to evaluate the shear strength of soil, the in situ soil conditions and other factors should be simulated for obtaining meaningful results. For example, the Unconsolidated Undrained test on soil will yield the undrained strength, which can be used for finding the immediate stability of an excavation, whereas a consolidated undrained test with measurement of pore pressure can be used to evaluate the effective strength parameters of soil for designing the long term stability of an earth-fill dam. It is well known that the engineering behaviour of soil depends on the effective stress and not the total stress. The effective stress can be calculated by measuring the total stress and subtracting the pore water pressure from it. To cater to the needs of shear strength determination of soil we have a range of equipment.
Specification :
- Lift Plate Journey Per Revolution of The: 0.2mm
- Lifting Speed: 1.8mm/Min±15%
- Diameter of The Remolding Cylinder: Φ39.1mm
- Transport Package: Export Wooden Case
- Type: Unconfined Compression Testing Machine
- Max. Stroke of The Lift Plate: 30mm
- Max. Axial Load: 0.6kn
- Capacity : 50kN
- Material : Stainless Steel
- Type : Manual
- Minimum Order : 01 Piece
- Item Code : VSLIC-S215
- Packaging Details : Standarad Packaging
- Delivery time : Within 1 week or Depends upon Distance
Additional Information:
- Item Code: VSLIC-S215
- Delivery Time: 1 Week or Depend on the Distance
Hand Operated Sieve Shaker
Minimum Order Quantity: 1 Set
Usage/Application | For Shaking Soil,Cement and Aggregate |
Brand | Vertex |
Material | Iron |
Model Number | VSLIC3082 |
Shape | Round in bottom &,Round in bottom & Triangle head |
Capacity | 7 Sieves |
Noise | Noiseless |
Automation Type | Manual |
Color | Blue |
Handle Material | Iron |
I deal in | New Only |
Packing Type | Standard Packing |
About Product :
SIEVE SHAKER (HAND OPERATED) This is a light, portable but steady sieve shaker suitable for bench mounting the side to side movement to the carrier which can take upto 7 sieves of 150mm or 200mm diameter is through a train of gears operated by a hand wheel. A heavy fly wheel ensures smooth operation.Our offered Hand Operated Sieve Shaker is mainly used to assess the particle size distribution and the gradation of granular materials. These shakers are widely used in construction field laboratory and quality control and scientific research and other concrete forming laboratory. These shakers are designed for portable and hand operated. Our provided shaker is proficiently manufactured by suing contemporary technology as per the set quality norms under the guidance of experts. Further, our offered Hand Operated Sieve Shaker is available in different models and technical specifications or known for their unique features like long operational life, easy to operate, excellent functionality and sturdy construction.
Specifications:
- Size : 8"
- Operation : Hand Operated
- Diameter : 200 mm, 300 mm, 450 mm
- Material : Iron
- Shape : Round in Bottom & triangle head
- Usage/Application : Shaking Cement, Soil, Aggregate
- Sieve Holding Capacity : 7 Sieves
Features
- High durability and efficient workout
- Clear finish with customized designs
- Smooth working
- High speed and Clean Flow
- Very Long Service life
- Noiseless Work
- Superb Smooth Handle
- Compact Rolling Wheels
Other Details :
- Item Code : VSLIC 3082
- Packaging Details : Standard packaging
- Delivery time : Within 1 week or Depends upon Distance
Additional Information:
- Item Code: VSLIC3082
- Delivery Time: 1 Week or Depends upon Distance
Consolidation apparatus-Single gang
Capacity | Customize |
Power | Customize |
Pressure | Customize |
Size | Customize |
Model Name/Number | VSLIC-S120 |
Brand | Vertex |
Country of Origin | Made in India |
Features
- Less maintenance.
- Sturdy construction.
- Easy installation.
Additional Information:
- Item Code: VSLIC-S120
Standard Penetration Test
Type | Customize |
Brand | Vertex |
Material | Customize |
Voltage | Customize |
Phase | Customize |
Usage/Application | Construction Sites |
Swell Pressure Test Apparatus
Brand | Vertex |
Color | Any |
Capacity | Customize |
Dial Gauge | Dial gauge 0.01 mm X 25 mm travel |
Diameter | Customize |
Mould Size | Customize |
Country of Origin | Made in India |
Model Name/Number | VSLIC-S209 |
Accessories
- One loading unit Hand operated 5 Ton capacity with two rates of travel.
- One Gun metal mould, 100 mm dia x 127.3 cm height X 1000 cc volume with base plate and collar.
- One perforated swell plate 100 mm dia X 16 mm thick.
- One spacer 100 mm dia X 12.7 mm thick.
- Two porous stone of 100 mm dia X 12.7 mm thick.
- One load transfer bar.
- One steel ball & one soaking tank, 250 mm dia x 210 mm high.
- Dial gauge 0.01 mm X 25 mm travel.
- Proving ring of 2.5 KN capacity with calibration chart and carrying case.
Additional Information:
- Item Code: VSLIC-S209
Vertex Automatic Soil Compactor
Minimum Order Quantity: 10 Set
Phase Type | Single Phase |
Compaction | Soil Compaction |
Weight | 135 kg |
Capacity | 50 kg |
Brand/Make | Vertex |
Automation Grade | Automatic |
Color | Other Color |
Power | 370 W |
Dimensions | 640x340x1506 mm |
I deal in | New Only |
Drop Height | 300-450 mm |
Rammer Weight | 2.5-4.5 kg |
About Product :
Automatic Soil Compactor BS EN Rammer the automatic soil compactors is designed to provide a fully automatic uniform compaction of standard /modified and CBR specimens assuring conformity with the reference standard.
Compactor is equipped with programmable digital counter which allows machine to stop at the preset numbers of blows. The height and weight of the rammer is adjustable to suit test requirements. The drop weight is adjustable to 300 mm drop height and is also adjustable to 450 mm drop height. The rammer is circular faced with a 50 mm diameter and is adjustable to 2.5 kg. or 4.5 kg.
An automatic blow pattern ensures effective compaction for each layer of soil and the rammer travels across the mould. The table rotates the mould in equal steps and the number of blows per layer can beset at the beginning of the test by the digital counter.User defined blow number and in-out distribution is also available. A standard proctor / CBR switch, emergency stop and start push buttons are located beside the blow counter.220 V, 50-60 Hz, 1 Ph.
Specification :
Capacity : 50 kg approx.
Weight : 10kg approx.
Grade : Automatic
Voltage : 220v to 230v
Product Type : Compactor
Features:
- Work as filter
- Quick processing of soil
- High durability
Additional Information:
- Item Code: VSLIC3021
- Delivery Time: 1 Week
Triaxial Cell
Minimum Order Quantity: 1 Set
Material | Plastic,Glass,Steel |
Brand | Vertex |
Specimen Diameter | 38mm |
Leak proof upto | 10kg/cm.sq |
Thickness | 6mm |
Tube Material | Plastic |
Confining pressure | 0-600kPa |
The cell is useful for testing 38mm dia x 76mm high soil specimen. Transparent Perspex chamber with anvil and loading plunger, the cell is easily opened by releasing four nuts of the tie rods. It is leak proof up to 10kg/cm.sq. Fluid pressure. An oil plug which can also be used as an air vent is provided for introducing a thin layer of oil over water. This provides effective sealing at the plunger for long duration tests. The cell is fitted with four sleeve packed valves of no volume change type on the base. These valves are used for cell pressure, pore water pressure, drainage or back pressure. The loading plunger of the cell has dial gauge rest.
Specification :
- Make : Vertex
- Material : Plastic , Glass , Steel
- Leakproof upto : 10kg/cm.sq
- Specimen Diameter : 38mm
- Confining Pressure : 0-600kPa
- Sear Speed : 0.0016x4mm/min
- Sheath stretcher : 38mm dia
- Thickness : 6 mm
- Tube Material : Plastic
- Minimum Order Quantity : 01 Piece
Other Details :
- Model Number : VSLIC3057
- Standard : IS 2720 (Part XII)
Additional Information:
- Item Code: VSLIC3057
- Delivery Time: 1 Week or Depend on the Distance
Vertex Soil Hydrometer
Minimum Order Quantity: 1 Set
Usage/Application | Used for grain size analysis of soils |
Brand | Vertex |
Material | Glass |
Model Number | VSLIC-S199 |
Shape | Cylindrical |
Automation Type | Automatic |
Color | Other Color |
Length | 345 mm |
Scale Range | 0.995 to 1.030 density |
Temperature | 270 Degree C |
Is It Portable | Yes |
Country of Origin | Made in India |
About Product :
Used for grain size analysis of soils where more than 10% of the material will pass through 75 microns B.S. sieve. Manufactured from clear transparent glass having uniform clarity throughout the upper end on which density scale is engraved. The scale range is 0.995 to 1.030 density (gms./cc) at 270C smallest division on the scale is 0.0005.Specification :
- Automation Type : Automatic
- Length : 11 cm
- Material : Glass
- Power : Hydraulic
- Item Code: VSLIC-S199
- Minimum Order Quantity: 01 Piece
Additional Information:
- Item Code: VSLIC-S199
- Delivery Time: 1 Week
Liquid Limit Device (Motorised)
Minimum Order Quantity: 1 Set
Model Number/Name | VSLIC-S163 |
Display Type | Digital |
Usage/Application | Liquid Limit Device is used determining the amount of water needed to liquefy a Soil Sample. |
Brand | Vertex |
Grade | Automatic |
Voltage | 210 V |
Frequency | 50 Hz |
Phase | Three Phase |
Color | Other Color |
I deal in | New Only |
Country of Origin | Made in India |
Power Source | Electric |
About Product :
Liquid Limit Device Electrically Operated fitted with blow counter complete with Casagrande grooving tools and a Gauge Block. The liquid limit is defined as the moisture content at which the soil passes from plastic state to liquid state; it is very helpful in the classification of the potential properties of the soil material. The liquid limit device consists of a hard rubber base carrying a sliding carriage assembly to which a brass cup is hinged. The cup is raised and allowed to fall through a height of 1cm on to the hard rubber base, by the help of a lead screw provided at the back of the sliding carriage.
Spares:
- Casagrande grooving tool. ASTM grooving tool, height block,1cm high.
Features :
- Dimensional accuracy and compact size
- Durable and long lasting performances
- International quality
- Reasonable price
Additional Information:
- Item Code: VSLIC-3007
- Delivery Time: 1 Week
High Speed Stirrer
Minimum Order Quantity: 1 Set
Usage/Application | For Mechanical Analysis |
Brand | Vertex |
Model | VSLIC-S150 |
Voltage | 230 V |
Brand/Make | Vertex |
Automation Grade | Automatic |
Type | Vertical |
Due to the skills and proficiency of experts, we are enormously praised for providing a superior quality of High Speed Stirrer to our valuable customers.
Product Specification:
This is for mechanical analysis and also other laboratory applications for stirring Speed approximately 4000 R.P.M. underload. A dispersion cup is supported on rest on the stand of the stirrer and has a removable baffle. For operation on 230V A.C.supplied with dispersion cup or baffle cup.
Additional Information:
- Item Code: VSLIC-S150
- Minimum Order Quantity: 01 each
Additional Information:
- Item Code: VSLIC-S150
- Delivery Time: 1 Week
California Bearing Ratio Test Apparatus
Minimum Order Quantity: 1 Set
Display Type | Display |
Brand | Vertex |
Power Source | Electric |
Voltage | 210 V |
Phase | Single Phase |
Power | 3.5 kW |
Frequency | 50 Hz |
Model Number | VSLIC-S113 |
Country of Origin | Made in India |
About Product :
We are foremost organization, actively occupied in providing a wide of California Bearing Ratio Test Apparatus that meet on customer’s demand. The California Bearing Ratio Test, (usually called CBR test) is an empirical penetration test for evaluation of mechanical strength of natural ground, subgrades and base courses beneath new carriageway construction. It is to determine the relative bearing ratio and expansion characteristics. It was developed by the California department of transportation before World War II.The test can be performed in the laboratory on prepared samples or in-situ on location. It is important to appreciate that this test, being of an empirical in nature, is valid only for the application for which it was developed i.e., the design of highway base thickness. The basic site test is performed by measuring the pressure required to penetrate soil or aggregate with a plunger of standard area. The measured pressure is then divided by the pressure required to achieve an equal penetration on a standard crushed rock material
Features:
- Precise design
- Durable
- Calculates corrected CBR value at 2.5 and 5 mm the digital unit saves the load value at user defined displacement values such as 0.625, 1.25, 1.875, 2.5, 3.75, 5, 7.5,10, 12.5 mm
- The load corresponds to the displacements corrected respect to the linear region of the data has also saved
- The % CBR at 2.5 mm and % CBR at 5 mm is also automatically calculated and saved
- Can make test with displacement and limited load
control. - Real time display of test graph.
- CPU card with 32-bit arm RISC architecture.
- Permanent storage capacity up to 10000 test
results. - 4 analog channels, 2 channels are active for CBR.
- 1/256000 points resolution per channel.
- 10 data per second sample rate for each channel.
- Ethernet connecting for computer interface.
- 800x480 resolution 65535 color TFT-LCD industrial
touchscreen. - 4 main function keys.
- Multi-language support.
- 3 different unit system selection; kn, ton and lb
- Real-time clock and date
- Test result visualization and memory management
interface. - Remote connection through ethernet
- USB flash disc for importing test results and for
firmware. - USB printer support for inkjet and laser printers (ask
for compatible models) - Camera support for real-time video recording
during test(ask for compatible models) - Free of charge PC software for the test control and
advanced report generation
Additional Information :
The CBR test machine is supplied complete with:
- Load cell, 50 kN
- Penetration piston
- Linear potentiometric displacement transducer with connection part, 25x0.001 mm
- Computer software
- Connection cable
- Advanced report generation
Dimensions : 480 x 650 x 1150 mm
Weight (approx.) : 110 kg
Power : 370 W
Item Code : VSLIC-S113
Additional Information:
- Item Code: VSLIC-S113
Particle Size Sedimentation (Hydrometer Method)
Minimum Order Quantity: 1 Set
Usage/Application | To determine the quantitative size distribution of very fine particle in soils such as clay and silt |
Brand | Vertex |
Model Number | VSLIC-S169 |
Capacity | 1000ml |
Frequency | 50 Hz |
Voltage | 210 V |
Phase | Single Phase |
RPM | 4000 |
Glass Tank Dimensions | 600x300x380 mm |
Power Source | Electric |
About Product :
Particle size analysis of soils: Hydrometer method.
This equipment is used to determine the quantitative size distribution of very fine particle in soils such as clay and silt.
The complete set comprises:
- Sedimentation Cylinder,1000 ml capacity (6pieces) with rubber bungs.
- Soil Hydrometer, 151H, range 0.995 to 1.038g/ml with div. 0.001
- Glass Tank, dimensions: 600x300x380 mm
- Heater complete with thermostat, circulation unit. 230V Single Phase 50Hz 1000W
- Glass Thermometer, range -10 to 50° C., Sub-div. 0.5° C.
- Beaker, Borosilicate Glass, 250 ml capacity
- Sodium Hexametaphosphate, 1000 g
- High Speed Stirrer,4000 R.P.M, complete with baffle cup, for dispersing soil particles in water.
Additional Information:
Item Code: VSLIC-S169
Minimum Order Quantity: 01 Set
Additional Information:
- Item Code: VSLIC3010
- Delivery Time: 1 Week
Motorized Sand Equivalent Shaker
Minimum Order Quantity: 1 Set
Model | VSLIC-S189 |
Automation Grade | Semi-Automatic |
Usage/Application | Soil Testing |
Color | Blue |
Finishing | Mild Steel |
Weight | 32kg |
Brand | Vertex |
Display Type | Digital |
Voltage | 220-230Volt |
Dimension | 240 x 800 x 340MM |
Model Name/Number | VSLIC-4125 |
Power | 220-230Volt |
I Deal In | New Only |
Country of Origin | Made in India |
Quick Info:
VSLIC-S189 Sand Equivalent Shaker is used for the uniform shaking of Sand Equivalent Measuring Cylinders, at a specified rate and stroke.
The shaker is supplied complete with a timer. The horizontal movement, cycle and shaking time can easily be adjusted on the shaker to comply with EN or ASTM standards.
Product Technical Specifications:
- Stroke Travel (EN): 200 mm 1 mm
- Stroke Travel (ASTM): 203.2 mm 1.02 mm
- Rate (EN): 180mm 2/min
- Rate (ASTM): 175 mm 2/min
- Dimensions (mm): 240 x 800 x 340
- Standards : ASTM D2419, AASHTO T176
Additional Information:
- Item Code: VSLIC-S189
- Production Capacity: 10-20
- Delivery Time: 1 week
- Packaging Details: Corrugated Box or Wooden Box
Pycnometer Bottle
Minimum Order Quantity: 1 Set
Brand | Vertex |
Application | Chemical Laboratory, Industrial |
Country of Origin | Made in India |
Material | Glass |
Packaging Size | 1 Kg |
Model Name/Number | VSLIC-S182 |
Specification:
Comprises a 1 kg. glass jar with brass cone. Locking ring and rubber seal.
Spare: Rubber seal.
Additional Information:
- Item Code: VSLIC-S182
- Minimum Order Quantity: 01 Set
Additional Information:
- Item Code: VSLIC-S182
Vertex Soil Testing Kit
Minimum Order Quantity: 1 Set
Automation Grade | Manual |
Usage/Application | To determine on the spot soil pH value. This is a compact kit easy to carry on site. |
Color | Other Color |
Soil Elements | Nitrogen, Phosphorus, Potash |
Brand | Vertex |
Model Number | VSLIC-S201 |
I deal in | New Only |
Box Material | Plastic |
No of Equipment | 12 |
Usage | Soil Test |
About Product:
These kits are utilized profitably for soil richness assessment and compost suggestion. At our creation lab, propelled innovation is consolidated with unrivaled evaluation crude material, so as to convey a faultless extent at our customer's end. A very useful kit to determine on the spot soil pH value. This is a compact kit easy to carry on site.
Features:
- Compact Portable
- Simple User Friendly
- Tests for primary and secondary nutrients
Specifications:
- 12 thick walled test tubes with rubber bungs
- 1 tube cleaning brush
- 1 bottle of barium sulphate (100gm)
- 1 bottle of soil indicator (100gm)
- 1 bottle of distilled water (500gm) 1 Spatula
- 1 color chart, range 4.0 to 8.0 pH in 0.5 pH steps
Additional Information:
- Item Code: VSLIC-S201
- Minimum Order Quantity: 01 Set
Additional Information:
- Item Code: VSLIC-S201
- Delivery Time: 1 Week
Heavy Compaction Test Apparatus
Minimum Order Quantity: 1 Set
Material | SS |
Automation Grade | Manual |
Model Name/Number | VSLIC-S149 |
Brand | Vertex |
Country of Origin | Made in India |
Surface Finish | Chrome Coated |
About Product :
We manufacture and Provide Heavy Compaction Test with high quality and long lasting durability.
Specification:
The instrument consists one each of compaction mould steel 150 mm I.D. x 127.3mm height volume 2250cc. Complete with collar and base plate. Compaction Rammer is 4.89 kgs. in weight x 450 mm controlled fall.
Other Details :
- Standard: IS 2720
- Product Code: VSLIC-S149
Additional Information:
- Item Code: VSLIC-S149
- Delivery Time: 1 Week
Shrinkage Mould-Two Gang
Capacity | 20-30 ton/day |
Shape | Rectangle Shaped |
Type | Customize |
Usage/Application | Construction Laboratory |
Color | Any |
Brand | Vertex |
Material | Customize |
Technical Specifications
Automation Grade | Manual |
Usage | Cement Testing |
Condition | New |
Cutting Die | Yes |
Product Customization | Yes |
Assembly Required | Yes |
Rust Resistance | Yes |
Is It Water Resistance | Non Water Resistance |
In Situ Vane Shear
Automation Grade | Manual |
Phase | Customize |
Material | Customize |
Brand | Vertex |
Voltage | Customize |
Capacity | Customize |
Model Name/Number | VSLIC-S152 |
Country of Origin | Made in India |
The equipment consists of a torque applicator assembly mounted on a base. A gear wheel, which is marked in degrees, holds torque ring and is geared to a crank.
Accessories
- Vane (with vane rod) 65mm dia X 130mm high
- Vane (with vane rod) 75mm dia X 150mm high
- Vane (with vane rod) 100mm dia X 200mm high
- Dummy rod, corresponding to 65mm dia vane
- Dummy rod, corresponding to 75mm dia vane
- Dummy rod, corresponding to 100mm dia vane
Laboratory Vane Shear
Automation Grade | Manual |
Brand | Vertex |
Voltage | Customize |
Power | Customize |
Capacity | Customize |
Model Name/Number | VSLIC-S177 |
Country of Origin | Made in India |
Laboratory Vane Shear Apparatus Consist of a special motor, adjustable in height by means of a lead screw rotated by a drive wheel to enable the vane to be lowered into the specimen.
Rotation of the vane is by means of an electronic motor turns the upper end of a calibrated torsion spring to give a rotation of 0.1 degree/sec.
The vane shaft is attached through the hollow upper shaft to resettable pointer which indicates the angle of torque on a dial graduated in degrees. The die reading multiplied by spring factor gives torque.
Additional Information:
- Item Code: VSLIC-S177
Vane Shear Apparatus (Field Type)
Automation Grade | Manual |
Material | Customize |
Brand | Vertex |
Voltage | Customize |
Power | Customize |
Capacity | Customize |
Model Name/Number | VSLIC-S176 |
Country of Origin | Made in India |
A typical vane shear test kit usually contains the following items:
- Torque wrench
- Drive head
- Extension rods, usually D20/D22x1000 mm
- Spanner for extension rod
- 2 or 3 Vane sizes. Commin sizes: 19×38 mm, 25x50mm, 30x60mm, 75.8×151.5 mm
- Transport Case
- strength is less than 15 KN/m2.
- The test can be conducted in a laboratory or in the field.
Additional Information:
- Item Code: VSLIC-S176
Plummet Balance
Minimum Order Quantity: 1 Set
Brand | Vertex |
Model Number | VSLIC-S174 |
Power | Manual |
Surface Finish | Polished |
Conventionally particle size distribution analysis is carried out using pipette and hydrometer methods. Whereas in the hydrometer method it is possible to determine particle sizes in the range 75 microns, the method involves computation and it is time-consuming. The pipette method can be used for determining only the percentage of specific sizes less than 0.02, 0.006 and 0.002mm as a percentage of a total soil sample. The plummet balance method to determine sub-sieve particle size for the entire range is very rapid and only manipulation of a height of the balance, so that plummet sinks to the right depth is required. The percentage of soil in suspension is directly indicated by a pointer over a graduated scale.
Specifications
- A vertical rod is mounted on a sturdy base having levelling screws. A pointer with steel pivots turns in jewel bearing and moves over a graduated scale. Scale graduations are made 0-100% x 2%.To the other end of the pointer, a plummet is hanged. Rack and pinion arrangement is provided on the vertical rod for adjusting the height. Supplied with a chart showing the relationship between "K" and temperature of suspension of soils of varying specific gravity from 2.4 to 2.8 to help in solving stroke's equation. Supplied complete with one Perspex plummet one measuring jar and one rider weight for zero adjustments and one rider weight for adjusting the pointer to 100%.
Additional Information:
- Item Code: VSLIC-S174
Standard Compaction Test Equipment
Minimum Order Quantity: 1 Set
Model No | VSLIC-S206 |
Automation Grade | Manual |
Brand | Vertex |
Material | Stainless Steel |
The apparatus consists one each of compaction mould steel, 100 mm I.D. x 127.3mm height x 1000 cc.volume, complete with collar and base plate.Compaction Rammer is 2.6 kgs in weight x 310mm controlled fall.
Additional Information:
- Item Code: VSLIC-S206
- Minimum Order Quantity: 01 Set
- Standards:IS 2720, (PART-VII)
Additional Information:
- Item Code: VSLIC-S206
- Delivery Time: 1 Week
Proctor Needles (Spring Type)
Minimum Order Quantity: 1 Set
Brand | Vertex |
Model | VSLIC-3022 |
Material | Stainless Steel |
Packaging Type | Wooden Case |
Consists of a body housing a spring, a plunger calibrated to read 0-40 kg x 1 kg and a handle. It has a long stem & a short stem, both graduated at 12.5mm intervals to indicate the depth of penetration and for use with needles of larger & smaller areas respectively. Complete with needlepoint set comprising one each of 0.25, 0.5, 1, 1.5, 2, 3.5 & 6 sq. cm & Tommy pin. Supplied in a wooden carrying case.
Product Specification:
The instrument consists of a needle attached to a spring-loaded plunger, the stem of which is calibrated to read 0 to 40 kg division. Long stem is graduated at every 12.5mm to read depth of penetration and for use with needles of larger areas. The small penetration stem is also graduation in 12.5mm division and is used with needles of smaller areas. Needle points one each of 0.25, 0.5, 1.0, 1.5, 2.0, 3.5 and6.0 sq cm. And one Tommy pin is supplied.
Additional Information:
- Item Code: VSLIC-3022
- Minimum Order Quantity: 01 Set
Additional Information:
- Item Code: VSLIC-3022
- Delivery Time: 1 Week