General Lab Instruments

Approx. Rs 45,000 / PieceGet Latest Price

A cement core drill a drill specifically designed to remove a cylinder of material, much like a hole saw. The material left inside the drill bit is referred to as the core. Core drills used in metal are called annular cutter. For drilling masonry, carbide core drills can be used

Product Features

• Heavy duty, pillar type frame with 1500W.
• Varying cutting feeds provided with winter-fed swivel head which can be connected to suitable water supply.
• Provision at base for water collection/drainage.
• Core preparation from regular and irregular samples and core size: EX to 100mm.
• Clamping arrangement to hold specimens with regular / irregular shapes to the base of machines.
• Two cutting speeds at no load 950/2100RPM.
• Water tank 5ltr. IS standard outfit.

Technical specifications

• Coring angle: 0 to 360°
• Rack feed: 1000 mm.
• Shaft thread: 1¼-7.
• Power: 2200 W at 230 V; 1800 W at 110 V.
• Full load speed: 670/1140/1580 r.p.m.
• Coring range dia.: 20/200 mm.
• Dimensions approx.: 470x785x1630 mm.
• Weight approx.: 80 kg.

Approx. Rs 1,550 / PIECEGet Latest Price

• Weight Capacity: 10g, 100g, 200g, 300g, 500g, 600g, 1kg, 10kg, 50kg, 100kg
• Minimum Order: 1 Unit
• Material Construction: Stainless Steel
• Use: Industrial / Home / Office

Approx. Rs 1.8 Lakh / SetGet Latest Price

• The model NAK2 has an internal glass circle which is read via a scale microscope and which can be set to any value by turning the rim around the base of the instrument. Tacheometric levelling is also available with the K-version on fl at terrain by combining stadia and angular measurements with height readings.
• Standard deviation per km: 0.7mm (double-run levelling). Protection: IP53. Operating temperature: -20 °C to +50 °C. Weight: 2kg.
• Telescope – Magnifi cation: 32x. Clear objective aperture: 45mm. Shortest focusing distance: 1.6m, Multiplication factor: 100. Additive constant: 0.
• Compensator – Working range: ± 30’. Setting accuracy (stand. dev.): 0.3”. Sensitivity of circular level: 10/2mm. Graduation interval of Hz: 1 °.
• Push button compensator check
• Endless horizontal drive for left and right handed users
• Coarse and fine focusing knob
• Play-free footscrews
• Optional eyepieces available
• Top-class optics

Approx. Rs 1 / SetGet Latest Price

VS-HTY Automatic digital rebound hammer is an instrument used for non-damage testing and evaluation of compressive strength of hardened concrete in building structures. It can detect and record rebound value, carbonization depth value, Angle, test surface and other parameters. The strength of the component can be inferred immediately after testing.

FEATURES:

·      New upgrade, adopting three-proof shell design, waterproof, dustproof and shockproof.

·      Using a new MOS image sensor to subvert the traditional signal acquisition method, the data is accurate and reliable.

·      The rebound value is displayed in the form of numbers and scales, and the indication values are consistent.

·      Simple and convenient operation, according to the component management data, the strength is estimated, and the carbonization value can be recorded on site.

·      One main machine can be equipped with multiple mechanical rebound hammers to ensure continuous testing.

·      The software is powerful, can be built into a variety of measurement standards, and export a variety of test reports

·      Optional printer, can directly print test data on site.

Additional Information:

• Packaging Details: Material: engineering plastic Volume: 420 ¿¿ 140 ¿¿ 335mm Weight: 6kg

Approx. Rs 1 / SetGet Latest Price

VS-P800 Pile integrity tester is a test and analysis instrument for pile integrity testing and monitoring of precast pile driving process. Under impact or vibration load, the pile structure integrity and vertical bearing capacity of single pile are tested and analyzed. The purpose is to determine the bearing capacity of pile and the integrity of pile structure.

  Features:

·         New upgraded wireless cloud transmission function.

·         The operation of the instrument is convenient and fast. From the requirement of engineering inspection, the user can quickly master the usage method.

·         Small size, light weight, easy to carry.

·         The user operates through the touch screen, and the interface is simple.

·         Support multiple waveform processing methods to make defect positioning more accurate.

·         large-capacity data memory, support for mobile storage.

·         Built-in rechargeable lithium battery, long standby time.

·         The analysis software under Windows platform has comprehensive functions and flexible printing settings. It can print preview and output processing results, and can generate test reports

Approx. Rs 3,700 / SetGet Latest Price

Approx. Rs 95,000 / SetGet Latest Price

• Brand : Vertex
• Power : Electric
• Displaty : Analog
• Material : StainlessSteel
• Minimum Order quantity : 01

Additional Information:

• Item Code: VSLIC7003
• Delivery Time: 1 Week

Approx. Rs 1,500 / PIECEGet Latest Price

Additional Information:

• Delivery Time: 1 Week

Approx. Rs 1.95 Lakh / SetGet Latest Price

• Brand : Vertex
• Capacity : 100kN to 300kN
• Automation Grade : Automatic
• Phase : Three Phase
• Voltage : 440V
• Displacement Resolution : 0.01mm
• Load Measuring Accuracy : Better than 0.5%

• Model Number : VSLIC7000
• Delivery Time : 1 week or Depends on Distance.

Additional Information:

• Item Code: VSLIC7000
• Delivery Time: 1 Week or Depend on the Distance

Approx. Rs 18,500 / SetGet Latest Price

• Item Code : VSLIC 2066
• Other Models : VSLIC2066A Bowl Capacity: 0.005 cubic meter

Additional Information:

• Item Code: VSLIC-2066
• Delivery Time: 1 Week

Approx. Rs 1 / SetGet Latest Price

FEATURES:

 ·      Soil model is the combination of soil electronic data and soil physical data input by users, and it is the basis of testing soil parameters in a similar soil characteristic area.

·      When making a soil model, EDG is needed to collect electronic signals at different test points (the test point of this soil model is called soil test). Each test point needs to collect an electronic signal. At the same time, sand cone test is needed to obtain the physical characteristics of the soil, such as wet density, dry density and moisture content. The maximum dry density of the soil is measured in the laboratory, and then these data are input into the instrument so that the electronic data can be correlated with the physical data.

• At least three test points (soil test) are required for soil molding. The more test points, the more representative the soil model will be. Moreover, the larger the density and water content range covered by the test points.
• After the soil model is made, EDG can be used for field test. The test area is the area where the experimenter intends to test and the tested soil has the same physical characteristics.
•  A soil model is usually made for each different test area. Different projects need different soil moulds. Once the soil model representing this area is successfully made, the soil characteristics of any test point can be quickly and accurately measured by EDG through field test.
•  The actual test is to calculate the physical properties of soil by comparing the electronic data collected from the test points with the soil model. 

Technical Parameters:

Approx. Rs 8,900 / SetGet Latest Price

• No increase in heat load of space.
• May offset cooling load, particularly in the shoulder season.
• Can be configured and accessed near floor-level for operation, inspection, and maintenance.
• Packaged controls and appurtenances.
• Utilize existing fan and heating systems for distribution and reheat.
• No interference with space layout.

Approx. Rs 35,500 / PIECEGet Latest Price

Approx. Rs 45,000 / PieceGet Latest Price

Additional Information:

• Item Code: VSLIC-GL01
• Delivery Time: 1 week

Product Price :Get Latest Price

Additional Information:

• Delivery Time: 1 Week

Approx. Rs 1 / SetGet Latest Price

VS-FSY Crack depth tester is based on the principle of acoustic diffraction to measure the crack depth of concrete surface.

FEATURES:

 ·      New upgraded wireless cloud transmission function.

·      It adopts three anti-shell design, waterproof, dustproof and shockproof.

·      On-site testing is simple and fast, no need to manually interpret the acoustic parameters, directly display the crack depth.

·      The instrument is easy to operate, fast to master, no need for professional knowledge.

·      High accuracy, the maximum error is not more than 5 mm or 2%-10% of the actual seam depth.

Technical Parameters:

Additional Information:

• Packaging Details: Material: engineering plastic, Volume: 420 ¿¿ 140 ¿¿ 335mm, Weight: 5.5kg

Approx. Rs 95,000 / SetGet Latest Price

About Product :
The Automated Fraction Collector will aid in the liquid chromatography process. This can handle high-performance liquid chromatography (HPLC) but also open column chromatography. Used in conjunction with preparative hplc, this instrument can be perfect for a chemistry lab, pharmaceutical companies, or for environmental safety testing.

The VSLIC-100 comes with several different functions for collecting specimens. The timing function will collect liquid on a given time intervals. Peak recording will help determine when peaks arise within each analyte, and help to get the purest samples. This fraction collector also comes with room for up to 100 test tubes. The equipment can all be controlled using the microcomputer control, and setup easily using the simple LCD display.

Precision and accuracy are important in chromatography, and this fraction collector is impeccably precise. The included dust cover will help maintain purity, and the data saving function will retain information for up to ten years. It is easy to operate with a user-friendly digital display and menu. The microcomputer control helps in setup and monitoring as well. The several functions offered mean this fraction collector will serve all of your liquid chromatography needs, and get your laboratory running efficiently. This durable machine comes with a one year warranty.

Features

1. Microcomputer control
2. LCD display
3. Automatic reset
4. Timing function
5. Peak recording function
6. Tube fixing function
7. Drop recording function
8. Large capacity, holds up to 100 tubes

• Model : VSLIC-100

• Collection tubes : Up to 100
• Max. : 12 ml / pcs
• Timing collect range : 1 s- 24 hr
• Sampling range : 1 - 9999 drop
• Peak location range : 0 - 100 mv
• Power supply : 80 V - 240 V
• Display mode : LED display, chip control, menu operation
• Data saving when power off : 10 years

• Environment : Temperature: 0 - 40 degree;

• Tube number selection : 1-100
• Weight : 5.5 kg
• Dimension : 265*355*365 mm

• Power cable : 1

• 0.5 A Fuse : 2
• Relief Valve : 1
• Leakage Warning Board : 1
• Vertical Bar :1
• Spare Tube : 6
• Manual : 1
• Connecting Wire : 1
• Drop Recording Sensor : 1

• Collection Table : 1

Additional Information:

• Delivery Time: 1 Week

Approx. Rs 650 / SetGet Latest Price

• Dial Sizes: 2” to 6”
• Stem length: 2” to 48”
• Material of stem: Stainless steel

• Ranges: 0-50º C, 0-100º C, 0-150º C, 0-200º C,0-300º C, 0-400º C -20 to +60º C,-30 to +50º C.
• Product Code : VSLIC-9028

Additional Information:

• Item Code: VSLIC-9028
• Delivery Time: 1 Week

Approx. Rs 2,000 / PieceGet Latest Price