Vertex Scientific And Lab Instruments Co

Compliance with following International Standards

IS Standard- IS:14858, 2000 and IS 516

Product Overview

Manufactured as per international design, Channel model for highest mechanical stability, accurate centering of load and excellent repeatability.

Semi Automatic Manual pace rate control 20x4 Inch LCD Display Microprocessor Based, auto stop and manual release on failure of test specimen.

Reading of Load in KN and N/mm2 with auto calculation. with Pace Rate indication. Manual Pace rate Control will have certain limitations.

Note: CTM with Automatic Pace rate control is recommended for accurate Pace rate Setting. Further details as mentioned in Technical Part on following pages.

Introduction

• The digital compression testing machine has been designed to meet the need for a simple, economic and reliable means to test concrete for its compressive strength
• The design expressive of simplicity, both of construction and operation, makes the machine easy to use and maintain.

The digital machines are provided with a MANUAL pace rate controller, to enable maintain a constant rate of loading.

Salient Features Semi Automatic Digital CTM Machine

1. Available 20x4 Inch LCD Display Microprocessor Based Actual Load / Peak load, Rate of loading and Calculated load in kN , KG/cm², N/mm², mPA(as soon as sample fails)
2. Thermal Printer for Result Automatic Print after break Samples.
3. Four column high stiffness and high stability fully welded construction of the load frame.
4. Direct reading of compressive strength in N/mm2 No calculation required.
5. Peak hold facility.
6. Can manually control pace rate from 1 KN/Sec to 20 KN/sec.
7. Pace rate indication in KN/Sec.
8. Live Graph indication to control the pace rate
9. 10 Points Calibration.
10. Automatic internal calibration (without Proving ring)
11. Safety cut out for overload and electrical short circuit.
12. Safety door on the front side for operator safety.
13. Compact Pumping unit with manually variable rate of loading.

Scope of supply

• High strength rigid structure (Loading Frame)
• Pumping unit (Oil source cabinet)
• PLC Based System
• High precision pressure transmitter
• Pair of compression platens
• High pressure hose pipe
• NABL Calibration

Salient features of data manager PC software (Optional At Extra Cost.)

• Two way communication i.e machine operates from computer and from the touch screen controller both (Stat, stop, save data and save graph)
• Results directly saved in excel file
• Graph also saved in excel file
• Capable to save customer name, other details of customer, ageing of cube moulds, identification mark of the cube mould, date and time of testing
• Capable to print direct report from the computer
• Capable to select different test parameters like pace rate, sample size and area from the computer (software)

Note :

Use of 150VA three phase CVT (Constant Voltage Transformer) is essential to protect the machine against voltage fluctuations. Warranty voids in case of any damage due to power fluctuation.

Compliance with following International Standards

IS Standard- IS:14858, 2000 and IS 516

Product Overview

Manufactured as per international design, Plate model for highest mechanical stability, accurate centering of load and excellent repeatability.

Semi Automatic Manual pace rate control Touch Screen 7Inch, auto stop and manual release on failure of test specimen.

Reading of Load in KN and N/mm2 with auto calculation. with Pace Rate indication. Manual Pace rate Control will have certain limitations.

CTM with Automatic Pace rate control is recommended for accurate Pace rate Setting. Further details as mentioned in Technical Part on following pages.

Introduction

• The digital compression testing machine has been designed to meet the need for a simple, economic and reliable means to test concrete for its compressive strength
• The design expressive of simplicity, both of construction and operation, makes the machine easy to use and maintain.

The digital machines are provided with a MANUAL pace rate controller, to enable maintain a constant rate of loading.

Salient Features Semi Automatic Digital CTM Machine

1. Available 7Inch Touch Screen LCD Display Actual Load / Peak load, Rate of loading and Calculated load in kN , KG/cm², N/mm², mPA(as soon as sample fails)
2. 58mm Thermal Printer for Result Automatic Print after break Samples.
3. Four column high stiffness and high stability fully welded construction of the load frame.
4. Direct reading of compressive strength in N/mm2 No calculation required.
5. Peak hold facility.
6. Can manually control pace rate from 1 KN/Sec to 20 KN/sec.
7. Pace rate indication in KN/Sec.
8. Live Graph indication to control the pace rate
9. 10 Points Calibration.
10. Built in memory for last 10000 readings
11. Automatic internal calibration (without Proving ring)
12. Safety cut out for overload and electrical short circuit.
13. Safety door on the front side for operator safety.
14. Compact Pumping unit with manually variable rate of loading.

Scope of supply

• High strength rigid structure (Loading Frame)
• Pumping unit (Oil source cabinet)
• PLC Based System
• High precision pressure transmitter
• Pair of compression platens
• High pressure hose pipe
• NABL Calibration

Salient features of data manager PC software (Optional At Extra Cost.)

• Two way communication i.e machine operates from computer and from the touch screen controller both (Stat, stop, save data and save graph)
• Results directly saved in excel file
• Graph also saved in excel file
• Capable to save customer name, other details of customer, ageing of cube moulds, identification mark of the cube mould, date and time of testing
• Capable to print direct report from the computer
• Capable to select different test parameters like pace rate, sample size and area from the computer (software)

Note :

Use of 150VA three phase CVT (Constant Voltage Transformer) is essential to protect the machine against voltage fluctuations. Warranty voids in case of any damage due to power fluctuation.

Compliance with following International Standards

IS Standard- IS:14858, 2000 and IS 516

Product Overview

Manufactured as per international design, Plate model for highest mechanical stability, accurate centering of load and excellent repeatability.

Semi Automatic Manual pace rate control Touch Screen 7Inch, auto stop and manual release on failure of test specimen.

Reading of Load in KN and N/mm2 with auto calculation. with Pace Rate indication. Manual Pace rate Control will have certain limitations.

CTM with Automatic Pace rate control is recommended for accurate Pace rate Setting. Further details as mentioned in Technical Part on following pages.

Introduction

• The digital compression testing machine has been designed to meet the need for a simple, economic and reliable means to test concrete for its compressive strength
• The design expressive of simplicity, both of construction and operation, makes the machine easy to use and maintain.

The digital machines are provided with a MANUAL pace rate controller, to enable maintain a constant rate of loading.

Salient Features Semi Automatic Digital CTM Machine

1. Available 7Inch Touch Screen LCD Display Actual Load / Peak load, Rate of loading and Calculated load in kN , KG/cm², N/mm², mPA(as soon as sample fails)
2. 58mm Thermal Printer for Result Automatic Print after break Samples.
3. Four column high stiffness and high stability fully welded construction of the load frame.
4. Direct reading of compressive strength in N/mm2 No calculation required.
5. Peak hold facility.
6. Can manually control pace rate from 1 KN/Sec to 20 KN/sec.
7. Pace rate indication in KN/Sec.
8. Live Graph indication to control the pace rate
9. 10 Points Calibration.
10. Built in memory for last 10000 readings
11. Automatic internal calibration (without Proving ring)
12. Safety cut out for overload and electrical short circuit.
13. Safety door on the front side for operator safety.
14. Compact Pumping unit with manually variable rate of loading.

Scope of supply

• High strength rigid structure (Loading Frame)
• Pumping unit (Oil source cabinet)
• PLC Based System
• High precision pressure transmitter
• Pair of compression platens
• High pressure hose pipe
• NABL Calibration

Salient features of data manager PC software (Optional At Extra Cost.)

• Two way communication i.e machine operates from computer and from the touch screen controller both (Stat, stop, save data and save graph)
• Results directly saved in excel file
• Graph also saved in excel file
• Capable to save customer name, other details of customer, ageing of cube moulds, identification mark of the cube mould, date and time of testing
• Capable to print direct report from the computer
• Capable to select different test parameters like pace rate, sample size and area from the computer (software)

Note :

Use of 150VA three phase CVT (Constant Voltage Transformer) is essential to protect the machine against voltage fluctuations. Warranty voids in case of any damage due to power fluctuation.

Compliance with following International Standards: IS : 14858 ‑ 2000 and IS 516

Manufactured as per International design, Plate model for highest mechanical stability, accurate centering of load and excellent repeatability. Manual pace rate control, auto stop and manual release on failure of test specimen. Reading of Load in KN and N/mm2 with auto calculation. with Pace Rate indication. Manual Pace rate Control will have certain limitations.

CTM with Automatic Pace rate control is recommended for accurate Pace rate Setting.

Introduction:

1. The digital compression testing machine has been designed to meet the need for a simple, economic and reliable means to test concrete for its compressive strength
2. The design expressive of simplicity, both of construction and operation, makes the machine easy to use and maintain.
3. The digital machines are provided with a MANUAL pace rate controller, to enable maintain a constant rate of loading.

Salient Features of Vertex ‑ Digital CTM Machine:

1. 2 line Alphanumeric display with backlite, displaying ‑ Actual Load / Peak load, Rate of loading and Calculated load in N/mm² (as soon as sample fails)
2. Four column high stiffness and high stability fully welded construction of the load frame.
3. Direct reading of compressive strength in N/mm2 ‑No calculation required.
4. Peak hold facility.
5. Can manually control pace rate from 1 KN/Sec to 20 KN/sec.
6. Pace rate indication in KN/Sec.
7. Bar Graph indication to control the pace rate
8. Built in memory for last 10 readings
9. Automatic internal calibration(without Proving ring)
10. Safety cut out for overload and electrical short circuit.
11. Safety door on the front side for operator safety.
12. Compact Pumping unit with manually variable rate of loading.

Scope of supply:

1. Channel Type Load Frame
2. Pumping unit (Oil source cabinet)
3. Digital Load indicator
4. High precision pressure transmitter
5. Pair of compression platens
6. High pressure hose pipe

Salient features of data manager PC software (Optional At Extra Cost.) 

1. Two way communication i.e. machine operates from computer and from the touch screen controller both (Stat, stop, save data and save graph)
2. Results directly saved in excel file.
3. Graph also saved in excel file.
4. Capable to save customer name, other details of customer, ageing of cube moulds, identification mark of the cube mould, date and time of testing
5. Capable to print direct report from the computer. 
6. Capable to select different test parameters like pace rate, sample size and area from the computer (software)
7. Capable to select different type of tests, like flexural, CTM, aggregate crushing etc.