Call 08046044257 74% Response Rate

Send Email

Bitumen and Asphalt Testing Equipment

Vertex Scientific & lab Instruments Co. provides wide array of modular Bitumen Testing Equipment to accomplish these needs. Vertex Co. Geotechnical testing equipment includes We Supplied comprehensive range of bitumen testing equipment, asphalt testing instruments comprises of Ductility testing machine, Rolling thin film oven, Bitumen penetrometer, Kinematic viscosity bath, Marshall stability test apparatus, Automatic marshal compactor, water bath for penetration test etc
Automatic Digital Bitumen Penetrometer

Automatic Digital Bitumen Penetrometer

Product Price: Rs 1 / SetGet Best Price

Product Details:
VoltageCustomize
Display TypeCustomize
BrandVertex
PowerCustomize
Usage/ApplicationConstruction Laboratory
Country of OriginMade in India
Model Name/NumberVSLIC-B109
The Automatic Digital Penetrometer is used for the determination of the needle penetration according to ASTM D5 standards. The penetration depth of the needle is determined with a pulse type electronic measuring system, which is separated from the plunger during the test, this allows the free  guidance of the plunger which virtually eliminates friction during the test.
Before each start of the test the measuring system automatically resets, and then the penetration needle moves down to the sample by using the electric drive, the needle position can be finely adjusted by using the joystick located on the front panel. A magnifying glass and an ultra-bright LED lamp are supplied to assist the operator; the plunger is then automatically released onto the sample and raised automatically after the testing period. The test result is displayed on the digital display. The plunger can easily be removed to calibrate its weight.
Features
  • Digital penetration measurement.
  • Complete with micrometer vertical adjustment.
  • The electronic timer allows the user to set up and read the fall time of the needle during testing.


Additional Information:

  • Item Code: VSLIC-B109
Get Best QuoteRequest Callback
Semi Automatic Penetrometer

Semi Automatic Penetrometer

Product Price: Rs 1 / SetGet Best Price

Product Details:
VoltageCustomize
Display TypeDigital LCD
BrandVertex
PowerCustomize
SizeCustomize
Usage/ApplicationConstruction Laboratory
Country of OriginMade in India
Model Name/NumberVSLIC-B108
The Semi-Automatic Penetrometer for Liquid Limit consists of a cast iron base with coarse and fine leveling screws, a digital penetration measurement gauge 0.01 mm resolution/readability and an automatic penetration timer unit.

Semi-Automatic Penetrometer for Liquid Limit supplied complete with:

  • Automatic Penetration Timer Unit.
  • 30° Penetration ConeM.
  • Sample Cups, 3 pcs. Aluminum, Ø55 mm x h:35 mm.
Features
  • Easy to operate.
  • Requires minimum maintenance.
  • Semi automatic operation.


Additional Information:

  • Item Code: VSLIC-B108
Get Best QuoteRequest Callback
Digital Penetrometer

Digital Penetrometer

Product Price: Rs 1 / SetGet Best Price

Product Details:
VoltageCustomize
Display TypeCustomize
Brandvertex
PowerCustomize
SizeCustomize
Usage/ApplicationConstruction Laboratory
Country of OriginMade in India
Model Name/NumberVSLIC-B107
Same as VSLIC 4007 but the unit is compact with timer to control duration of penetration. The instrument is provided with lead screw gear arrangement, Leveling screws, Spirit level and a digital preset timer.
This is based on advanced digital technology. Offered range is available in numerous specifications and the latest model range. This Digital Penetrometer is offered to our clients in a distinct size range as per their needs and requirements. Offered range is free from all types of defects. We are offering this at convenient price.
Features
  • Digital Readout in mm.
  • Time saver.
  • Accurate results.
  • Easy operations.
  • Attractive finish.
  • Economically priced.
  • Hassle-free operation.
  • Timer inbuilt.


Additional Information:

  • Item Code: VSLIC-B107
Get Best QuoteRequest Callback
Standard Penetrometer

Standard Penetrometer

Product Price: Rs 1 / SetGet Best Price

Product Details:
Model Name/NumberVSLIC-B106
Type Of Testing MachinesPowder Dynamometer
ColorWhite
Packaging TypeCartoon Box
VoltageCustomize
Display TypeCustomize
Load CapacityCustomize
BrandVertex
Country of OriginMade in India

The Standard Penetrometer is sturdily constructed, with alight alloy base table with leveling screws, plated vertical rod and a micrometric vertical adjustment device. The slider is manufactured from brass with free fall. The dial graduated in 0.1mm divisions round360°, has a diameter of 150mm.

Features
  • Spare Penetration Needle.
  • Spare Penetration solid cone.
  • Spare Penetration brass hollow cone.
  • Grease worker hand operated.
  • Grease worker hand-operated big handle (Lever type).
  • Grease cutter as per IP 50.
  • Transfer Dish.


Additional Information:

  • Item Code: VSLIC-B106
Get Best QuoteRequest Callback
Vialit Adhesan Testing Machine

Vialit Adhesan Testing Machine

Get Latest Price

Product Details:
MaterialStainless Steel
Model Name/NumberVSLIC-B130
Usage/ApplicationLaboratory
Type Of Testing MachinesPowder Dynamometer
ColorWhite
Packaging TypeWooden Box
Display TypeDigital
Motor PowerCustomize
Load CapacityCustomize
BrandVertex
Country of OriginMade in India
Vialit Adhesion Test Apparatus. Used to assess the adhesion property of aggregates to bitumen. The method is a check on the adhesion of aggregates to be applied to the surface of wearing course rolled asphalt.
Supplied complete with a metal basement with three vertical pointed rods to hold the flat steel plate, 50 cm. high vertical rod with a slot at the upper end for the steel ball to drop, a 512 g steel ball, 6 metal test plates and a hand-operated rubber wheel roller. The mechanical aggregate deployment should be ordered separately.
Product Features
  • Flat Steel Plates, 6 pcs.
  • Steel Ball, 512 g.
  • Rubber Wheel Roller, hand operated.


Additional Information:

  • Item Code: VSLIC-B130
Get Best QuoteRequest Callback
Mixer with Heating Jacket

Mixer with Heating Jacket

Get Latest Price

Product Details:
Power SourceElectric
Type Of The Drum MixerCustomize
Usage/ApplicationIndustrial
Brand/MakeCustomize
CapacityCustomize
Model Name/NumberVSLIC-B124
Mixer TypeCustomize
BrandVertex
Country of OriginMade in India

A Mixer with Heat Jacket Used in conjunction with an Iso Mantle, is suitable for mixing samples of asphalt. Bench mounting Mixer, 6-liter nominal capacity. Supplied with bowl, beater, and whisk. Motorized with two speed operated on 230 V A.C., Single Phase.
ISO MANTLE ELECTRIC HEATER

Technacal Specifications
Material Stainless Steel
Phase Single Phase
Voltage (volt) 230 V A.C
Nominal capacity 6 liter
Get Best QuoteRequest Callback
Reflux Extractor 4000 Gms

Reflux Extractor 4000 Gms

Get Latest Price

Product Details:
Model Name/NumberVSLIC-B110
Usage/ApplicationLaboratory
Type Of Testing MachinesEddy Current Dynamometer
ColorWhite
Packaging TypeWooden Box
Display TypeDigital
Load CapacityCustomize
BrandVertex
Country of OriginMade in India
The simple apparatus working on the same operation principle of consisting of cylindrical glass jar supporting two metal cones of stainless steel cloth and a metal condenser on top of the jar

Additional Information:

  • Item Code: VSLIC-B110
Get Best QuoteRequest Callback
Dean Stark

Dean Stark

Get Latest Price

Product Details:
Usage/ApplicationLaboratory
MaterialGlass
BrandVertex
Design TypeBottle
Weight4 kg
I Deal InNew Only
Country of OriginMade in India
Model Name/NumberVSLIC-B104
It is Used to determine the water in petroleum products or bituminous materials by distilling them with volatile solvent.The equipment comprises electric heater with thermoregulator, glass still, support stand, condenser, receiving trap, clamp.
Features
  • Glass still 10 ml.
  • Glass receiver.
  • Glass condenser.
  • Electric heater with thermoregulator.
  • Power: 250 W.
  • Weight approx.: 4 kg.



Additional Information:

  • Item Code: VSLIC-B104
Get Best QuoteRequest Callback
Bitumen Cone Penetrometer

Bitumen Cone Penetrometer

Product Price: Rs 5,400 / SetGet Best Price

Minimum Order Quantity: 1 Set

Product Details:
MaterialMS
Automation GradeManual
Usage/ApplicationTo determine grade of bitumen.
ColorOther Color
BrandVertex
Display TypeAnalog
I deal inNew Only
Country of OriginMade in India
Base ShapeSquare
Operating ModeManual
Total sliding weight148 gm

About Product :
Our organization is ranked amongst the reputed names in the market for providing Bitumen Cone Penetrometer. Furthermore, we present this range to our patrons at nominal prices.
Used to determine grade of bitumen. The penetration tests determine consistency of bitumen for the purpose of grading. Depth in units 1/10 of millimeter to which a standard needle having a standard weight will penetrate vertically in a duration of five seconds at a temperature of 25° C determines penetration for gradation.

Features:

  • Supreme quality
  • Exceptional standards
Specification:
It consists of a vertical pillar mounted on a base provided with leveling screws.The head, together with dial plunger rod a cone (or needle) slides on a pillar and can be clamped at any desired height. A rack and pinion and pointer assemble provides fine adjustment of needle or cone tip to sample. It incorporates a clutch mechanism. Which makes reading of penetration and
subsequent resetting a simple and accurate operation. The dial is graduated in 400 1/10 and the millimeter subdivisions and the needle pointer against figures makes easy reading.Supplied with a bitumen penetration needle, ring weight one each 50 gms. and 100 gms. two sample containers.

Accessories:
Penetration cone for empirical estimation of penetration of lubricating grease,petroleum jelly etc.

Additional Information:

  • Delivery Time: 1 Week
Get Best QuoteRequest Callback
Automatic Compactor For Bituminous Mixes

Automatic Compactor For Bituminous Mixes

Product Price: Rs 1.15 Lakh / SetGet Best Price

Minimum Order Quantity: 1 Set

Product Details:
Automatic GradeAutomatic
Country of OriginMade in India
Power SourceElectric
Voltage210 V
Frequency50 Hz
Model Name/NumberVSLIC-B134

Automatic Marshal Compactor is to speed up the process with ease and accuracy to prepare cylindrical specimens for Marshal Stability Testing Machine. The compactor has been designed to simulate hand compaction as described in ASTM D1559. This apparatus automatically compacts the sample and stops after a preset number of blows have been completed. The Compactor gives Uniformly and accurately compacted marshal moulds for reliable testing.

Features:

Long lasting nature

Industry proven design

Sturdy



Additional Information:

  • Item Code: VSLIC-B134
Get Best QuoteRequest Callback
Centrifuge Binder Extractors

Centrifuge Binder Extractors

Product Price: Rs 1 / SetGet Best Price

Product Details:
Usage/ApplicationConstruction Laboratory
Model Name/NumberVSLIC-B113
ColorBlue
BrandVertex
Weightapprox. 50kg
Power SourceElectric
Country of OriginMade in India
StandardASTM D2172, AASHTO T-58, T-164

Due to our years of expertise in this realm, we are readily affianced in presenting an exceptional quality variety of Centrifuge Binder Extractors.

Features: 

  •  Excellent design 
  • Durable  
  • Fine finish

Motorised Electrically Driven:

  • The motorised version is provided with a variable speed control device and a hand brake to stop rotation when switched off. The electric motor is of 0.25 HP capacity coupled to a geared assembly. Suitable for operation on 230 Volts, 50 Hz, AC single phase.

Recommended Accessories Consumables:

  • Used for determination and checking of bitumen percentage in bituminous mix
  • Consists of a removable aluminum rotor bowl, capacity 1500 gms.
  • This shaft and bowl is rotated by an electric motor and gear
  • The solvent is introduced during the test through the holes in the cap of the housing.
  • A drain is provided to collect dissolved bitumen coming out of the rotating bowl and getting collected in the housing.
  • Operates on 230 Volts A.C. single phase. Accessories

Accessories:

  • Filter paper disc (packet of 100nos.)
  • Benzene


Additional Information:

  • Item Code: VSLIC-B113
  • Delivery Time: 1 Week
Get Best QuoteRequest Callback
Asphalt Mixer Theoretical Density

Asphalt Mixer Theoretical Density

Product Price: Rs 1 / SetGet Best Price

Product Details:
CapacityCustomize
Usage/ApplicationConstruction
BrandVertex
VoltageCustomize
SizeCustomize
Automation GradeCustomize
Model Name/NumberVSLIC-B138
I Deal InNew Only
Country of OriginMade in India

Asphalt Mixer Theoretical Density is used for determination of theoretical density of asphalt mixer by vacuum method for applications such as asphalt mixer design, road condition investigation, calculation of porosity and compactness in the road construction quality management.

The equipment has the main body fitted with a digital vacuum indicator, two vacuum containers, a vibratory table, control panel. A vacuum pump is also supplied.
The vibratory table operates on manual and automatic mode to release the entrapped air from the asphalt sample.
Features
  • Vacuum range : 0-700mm of Hg.
  • Vibration loading capacity : 10kg.
  • No. of sample : Two.
Get Best QuoteRequest Callback
Rolling Thin Film Oven

Rolling Thin Film Oven

Product Price: Rs 1 / SetGet Best Price

Product Details:
Usage/ApplicationConstruction
BrandVertex
MaterialAluminium Alloy
Model Name/NumberVSLIC-B137
ShapeRectangular
CapacityCustomize
Temperature RangeCustomize
Country of OriginMade in India

The Rolling Thin-Film Oven Test (RTFOT) is one of the most commonly used standardized tests to simulate the STA of binders. This test is used to measure the combined effects of heat and air on a thin film of bitumen or bituminous binder in permanent renewal.

Test Method

Determines the effect of heat and air on a moving film of asphalt to serve as an indicator of approximate change in properties during conventional hot-mixing. The results are reported in terms of the changes in selected properties such as viscosity, penetration, and ductility brought about by the RTFO test, as evidenced by test data taken before and after the 75-minute oven cycle.

Product Features

  • Invented, designed and manufactured in California.
  • Super accurate P.I.D. controller.
  • Low thermal mass RTD.
  • Over-temperature safety cut-out.
  • Double-walled temperature cabinet.
  • Unique temperature control suppression.
  • Made in India.

Technical Specifications

Construction Double-walled construction.
16-gauge welded steel exterior.
18-gauge corrosion resistant stainless steel
interior
Insulation mm (inch) 89 mm (3.5) of high density fiberglass
insulation
Controller  Programmable microprocessor UL listed
Temperature Display Measured Temperature – 4 digit red LEDs
Temperature Set Point – 4 digit green LEDs
Thermal Protection Prevents oven from overheating in the event
of control failure
Temperature Range Ambient to 200°C (390°F)
Vents Double exhaust vents for dissipation of
expended volatile from specimen
Air Flow Adjustment Needle valve (long taper)
Air Pressure Gauge Range 0 – 100 psi
Heat Exchanger 5/16 inch diamete copper tube
Electrical Supply CS0325-1060: 1 Ph 208-230 V 60 Hz
(Domestic)
CS0325-1061: 1 Ph 208-230 V 60 Hz
(International)
CS0325-1062: 1 Ph 208-230 V 60 Hz
(With Digital Flowmeter)
CS0325-1063: 1 Ph 208-230 V 60 Hz
(With Digital Flowmeter – International)
CS0325-1050: 1 Ph 208-230 V 50 Hz
(International)
CS-0325-1051: 1 Ph 208-230 V 50 Hz
(With Digital Flowmeter – International)
Dimensions (WxDxH)
mm (inch)
1016 x 660 x 915 (40 x 26 x 36)
Estimated Weight
Kg (lbs)
173 (380)


Additional Information:

  • Item Code: VSLIC-B137
Get Best QuoteRequest Callback
Content Tester

Content Tester

Product Price: Rs 1 / SetGet Best Price

Product Details:
ColorAny
Country of OriginMade in India
UsagesIndustrial
CapacityCustomize
hightCustomize
Model Name/NumberVSLIC-B136
The Content Tester is used to determine the asphalt content of hot mix asphalt (HMA), paving mixtures and pavement samples by removing the asphalt in an ignition furnace by means of sample heating, not by means of solvents.
It is used to determine the asphalt content of hot mix asphalt (HMA) and pavement samples by removing the asphalt in an ignition furnace by means of sample heating, not by means of a solvent. Standard followed is ASTM D6307.
Product Features
  • Working temperature : 538 +- 2 degree Celsius.
  • Combustion temperature : 800-degree Celsius.
  • Weight of the sample : 4500 g.
  • Recommended weight of sample : 1500g.
  • Accuracy of electronic balance: 0.1g x 10kg.
  • Timer for test result : 30 to 45 min.
  • End point sensitively : 0.01% for 3 consecutive minutes.
  • Data output : Through USB.
  • Chamber size : 400mm x 380mm x 380mm.
  • Power rating : 5kW.
  • Accessories : Sample Bucket-2 sets, Lifting handle -No., Asbestos Gloves -1 pair, safety Helmet –1No.


Additional Information:

  • Item Code: VSLIC-B136
Get Best QuoteRequest Callback
Loss On Heating / Thin Film Oven

Loss On Heating / Thin Film Oven

Product Price: Rs 1 / SetGet Best Price

Product Details:
Usage/ApplicationConstruction laboratory
BrandVertex
Model Name/NumberVSLIC-B135
ShapeRectangular
FeaturesMicroprocessor digital control.
Automation TypeAutomatic
The Thin-Film Oven is used for determining the loss in mass of oil and asphaltic/bituminous compounds when heated with the loss on heating test method or the effect of heat and air on semi-solid asphaltic/bituminous materials with the Thin-Film Oven (TFO) test method.
The Thin-Film Oven is used for determining the loss in mass of oil and asphaltic/bituminous compounds when heated with the loss on heating test method or the effect of heat and air on semi-solid asphaltic/bituminous materials with the Thin-Film Oven (TFO) test method.
Product Features
  • Microprocessor digital control.
  • Independent overheat thermostat.
  • Mains switch.
  • On/off switch for the turntable motor.
  • Indicator lamps.
Get Best QuoteRequest Callback
Benkelman Beam

Benkelman Beam

Product Price: Rs 1 / SetGet Best Price

Product Details:
MaterialCustomize
BrandVertex
Dial GaugeCustomize
DiameterCustomize
LengthCustomize
Usage/ApplicationConstruction Laboratory
Country of OriginMade in India
Model Name/NumberVSLIC-B131
Vertex Benkelman Beam Apparatus utilizes the Technique of using a balanced beam in conjunction with a suitable vehicle to measuring road flexure.
The improved Benkelman Beam is a convenient, accurate device for measuring the deflection of flexible pavements under moving wheel loads. Operating on a simple lever arm principle, the unit consists of a Reference Beam, Body, two-part Probe Beam, and Rear Zero adjust.
Product Features
  • Light-weight aluminium construction.
  • Ease of transportation.
  • Unique telescopic design, simplifying field set-up.
  • Compact thereby reducing the amount of storage space needed.


Additional Information:

  • Item Code: VSLIC-B131
Get Best QuoteRequest Callback
Straight Edge

Straight Edge

Product Price: Rs 1 / SetGet Best Price

Product Details:
Usage/ApplicationIndustrial
MaterialSteel
Model Name/NumberVSLIC-B128
FeaturesMade of Steel
BrandVertex
Country of OriginMade in India
A straight edge is approximately 3 meters in length may be used to determine lateral surface regularity of a road surface. This lightweight apparatus is made up of mild steel or aluminum as per customers’ requirements and is equally supported at both ends producing a set height between the road surface and the beam. Any vertical irregularity is measured using incremented wedges.
Features
  • Material : Steel.
  • Shape : Flat.
Get Best QuoteRequest Callback
Refrigerated Ductility Apparatus

Refrigerated Ductility Apparatus

Product Price: Rs 1 / SetGet Best Price

Product Details:
MaterialCast Iron
VoltageCustomize
Automation GradeManual
PowerCustomize
BrandVertex
TemperatureCustomize
Country of OriginMade in India
Model Name/NumberVSLIC-B126
The Machine is having built-in the refrigeration system to work a below ambient temperature up to 10°C in tropical conditions. The Machine will operate at 27°C with control accuracy of ± 0.5°C as per the requirement of IS.
The apparatus consists of a water bath with a heater, and a circulating pump to maintain uniform water temperature. one-half of the briquette moulds is fixed in a fixed plate in the water bath, the other half of the briquette mould is fixed to a carrier which slides over a rotating threaded shaft with a clutch, The motor and gears to rotate the shaft are housed in a cabinet fixed above the other end of the bath. A pointer fixed to the carrier moves over. a scale graduated from 0-100 cm x 1mm fixed on the bath with “0” (Zero) of the scale towards the fixed plates side. The rotating shaft has 2 speeds of travel for the bracket, 5 cm/min.and 1cm/min. selected by a clutch. The water bath inside is of stainless steel with insulation and water drain cock. A heater is fitted inside the water bath. The Temp. is controlled by dual display Microprocessor-based Auto Tuning PID Digital Temp. indicator cum controller. Control switches for motor, stirrer, heater and indicator lamps are fixed at a convenient place on the water bath. Complete with three briquette molulds and one base plate, All supply single phase. As per IS 1208.
Features
  • Cost effective.
  • Optimum performance.
  • High efficiency.
  • Operated through electric current.
  • Consistent speed.
  • Refrigeration system and micro-processor based digital temperature controller.
  • Highly reliable.
  • Refrigeration system and micro-processor based digital temperature controller.
  • A heater is fitted inside the water bath.
  • Water bath inside is of stainless steel with insulation and water drain cock.
  • The motor and gears to rotate the shaft are housed in a cabinet fixed above the other end of the bath.


Additional Information:

  • Item Code: VSLIC-B126
Get Best QuoteRequest Callback
Ductility Testing Machine

Ductility Testing Machine

Product Price: Rs 1 / setGet Best Price

Product Details:
PhaseCustomize
MaterialCast Iron
VoltageCustomize
Automation GradeAutomatic
PowerCustomize
BrandVertex
TemperatureCustomize
Country of OriginMade in India
Model Name/NumberVSLIC-B125
Designed to test three specimens simultaneously. The machine consists of a carriage moving over a lead screw. An electric motor driven reduction gear unit ensures smooth constant speed and continuous operation.
The entire assembly is mounted with a water bath completely encased in metal-bound hardwood. It is equipped with an electric pump circulator and heater. The temperature is controlled by a digital temperature controller. Two rates of travel i.e. 5 cm/min and 1 cm/min are provided. Suitable for operation on 220 V, 50 Hz, Single Phase, AC supply.
Features
  • Stainless steel bath.
  • Temperature controller (Thermostatic/Digital).
  • Immersion electric heater.
  • Constant speed Pump cum stirrer.
  • Carriage holding up to three standard briquette moulds.
  • Electric motor with gear mechanism.
  • Stainless steel scale and pointer.
  • Control Panel.


Additional Information:

  • Item Code: VSLIC-B125
Get Best QuoteRequest Callback
Standard Tar Viscometer

Standard Tar Viscometer

Product Price: Rs 1 / SetGet Best Price

Product Details:
Model Name/NumberVSLIC-B121
BrandVertex
ViscosityCustomize
MaterialMild Steel
Usage/ApplicationLaboratory
Number Of CupsCustomize
TypeCustomize
Country of OriginMade in India
The Standard Tar viscometer consists of a chrome-plated copper bath, with a drain valve and a central tube to receive the test cup and to position the stirrer, and is mounted on a stand with leveling feet. Stirrer has a curved shield and is provided with an insulated handle, thermometer socket and swivel support for the valve.

Additional Information:

  • Item Code: VSLIC-B121
Get Best QuoteRequest Callback
Kinematic Viscometer Bath

Kinematic Viscometer Bath

Product Price: Rs 1 / SetGet Best Price

Product Details:
Usage/ApplicationConstruction Laboratory
BrandVertex
Model Name/NumberVSLIC-B117
ShapeRectangular
FeaturesDual digital displays show setpoint and actual bath temperature.
Automation TypeAutomatic
Country of OriginMade in India
The Kinematic viscometer bath is used to maintain the correct constant Temperature for estimating kinematic Viscosity of Oils & Petroleum product. In this type of bath, various Viscometers may be fixed as an internal part of the bath.
The bath is rectangular in shape. Inside tank made of Stainless steel sheet.This viscometer bath is used to maintain the correct constant Temperature for estimating kinematic Viscosity of Oils & Petroleum product. In this type of bath, various Viscometers may be fixed as an internal part of the bath. The bath is rectangular in shape. Inside tank made of Stainless steel sheet.
Features
  • Microprocessor temperature control between ambient and 150 °C (302 °F).
  • Integrated digital timing for easy measurement of sample efflux times.
  • Permits entry of viscometer constants for automatic calculation and display in viscosity units or seconds.
  • Dual digital displays show setpoint and actual bath temperature.
  • Selectable temperature scale – Fahrenheit or Celsius.
  • Conforms to ASTM D445, D2170 and related specifications.


Additional Information:

  • Item Code: VSLIC-B117
Get Best QuoteRequest Callback
Ring & Ball Apparatus

Ring & Ball Apparatus

Product Price: Rs 1 / SetGet Best Price

Product Details:
Usage/ApplicationLaboratory
Packaging TypeWooden Box
TypeCustomize
MaterialMild Steel
GradeCustomize
Load CapacityCustomize
Model Name/NumberVSLIC-B100
Country of OriginMade in India
The Ring and Ball Apparatus is a compact user-friendly apparatus. It has magnetic stirrer with the heating facility and digital display of temperature, the heating can be adjusted through knob in AIM 561-1 and can be controlled through the integral PIO controlled in Ring and Ball Apparatus ( Semi-Automatic).
This apparatus is meant for the determination of the softening point of bituminous materials. Softening point is that the temperature at which the specimen under test becomes soft enough to allow a steel ball of specific dimension to fall a required distance under test condition. To determine the temperature at which sample of bituminous material loaded by 9.5mm dia steel ball drops from a specified distance when heated under specified conditions.
Features
  • Real time display of temperature & time.
  • Applicable for water and glycerol liquid.
  • Adjustable speed magnetic stirrer for equally temperature control.
  • Auto display average test result.


Additional Information:

  • Item Code: VSLIC-B100
Get Best QuoteRequest Callback
Stripping Value Apparatus

Stripping Value Apparatus

Product Price: Rs 38,000 / SetGet Best Price

Product Details:
BrandVertex
MaterialCustomize
MediaCustomize
Packaging TypeCustomize
Size/DimensionCustomize
Usage/ApplicationConstruction Laboratory
Model Name/NumberVSLIC-B112
Country of OriginMade in India

Striping Value Apparatus is used for determining the Stripping Value of bituminous mixes having aggregate size 1.0mm to 75 microns.

A circular tray rotates in a vertical plane at a rate of approximately 100 R.P.M. by an electrical geared motor.
4 bottles of approximately 400 cc are mounted on this circular tray at an angle of 900. To each other with their mouth towards the center of the tray. A time switch is provided. Suitable for operation on 230 V A.C. Single Phase.
Features

  • Corrosion-resistance.
  • High operational fluency.
  • Easy to operate.


Additional Information:

  • Item Code: VSLIC-B112
Get Best QuoteRequest Callback
Hardness Tester For Mastic Asphalt

Hardness Tester For Mastic Asphalt

Product Price: Rs 1 / SetGet Best Price

Product Details:
ParameterHRC
Display TypeDigital
Model Name/NumberVSLIC-B111
AccuracyCustomize
DimensionCustomize
BrandVertex
I Deal InNew Only
Country of OriginMade in India
This machine is used to determine the hardness of asphalt material the design features direct vertical loading with loading weight that rests on thrust bearings, therefore, the load is applied to the specimen without transmitting the shock to the loading column.
At the end of the loading period, the depth of penetration of the pin can be read from the dial gauge to an accuracy of 0.01 mm. The thermostatically controlled heater unit has a built-in impeller which circulates the water to maintain an even temperature throughout.

Additional Information:

  • Item Code: VSLIC-B111
Get Best QuoteRequest Callback
Distillation For Cut Back Bitumen

Distillation For Cut Back Bitumen

Product Price: Rs 8,500 / SetGet Best Price

Product Details:
Grade StandardAmerican
Usage/ApplicationBituminous Waterproofing
BrandVertex
FeaturesGas Heated.
I Deal InNew Only
Country of OriginMade in India
Model Name/NumberVSLIC-B105
The apparatus consists of a heavy gauge shield, lagged with asbestos cover in two parts and wire gauge. The shield is supported on a platform with chimney arranged for fitting to stand.
Complete with one distillation flask of 500 ml and one 100 ml crow receiver but without a thermometer. Electric hot plate heated with energy regulator. Thermometer ASTM 8°c – 2 to +400°c.
Features
  • Gas Heated.
  • Energy Regulator.
  • With Varrier Control.


Additional Information:

  • Item Code: VSLIC-B105
Get Best QuoteRequest Callback
Pavement Core Drilling Machine
  • Pavement Core Drilling Machine
  • Pavement Core Drilling Machine
  • Pavement Core Drilling Machine
  • Pavement Core Drilling Machine
  • Pavement Core Drilling Machine

Pavement Core Drilling Machine

Product Price: Rs 1 / SetGet Best Price

Minimum Order Quantity: 1 Set

Product Details:
MaterialMild Steel
Capacityupto 300mm Dia
BrandVERTEX
Drilling Speed475 - 800 R.P.M
Cutting Depth Mm12Inch
Country of OriginMade in India
Model Name/NumberVSLIC-B132
  • The Vertex Pavement Core Drilling Machine is petrol engine powered.
  • Road/Building drill has been designed specifically for the purpose of drilling test cores from or holes in, Roads, Airport Runways,Bridges etc. 
  • The Machine comprises of two vertical support columns, which carry the Drill head/Engine assembly with the help of screwed spindle. 
  • The 5 HP petrol engine with pulley mechanism works with minimum vibrations. 
  • The double precision bit advances with screwed spindle, which provides a constant, accurate drill pressure, minimum core chipping long bit life. 
  • The complete assembly is supplied on a rigid metal base with leveling facility and is suitable for vertically down coring applications only.


Additional Information:

  • Item Code: VSLIC-B132
  • Production Capacity: 10
  • Delivery Time: 10 Days
  • Packaging Details: Wooden Heavy Duty Pacakaging
Get Best QuoteRequest Callback
Single Briquette Mould

Single Briquette Mould

Product Price: Rs 950 / SetGet Best Price

Minimum Order Quantity: 1 Set

Product Details:
ColorOther Color
BrandVertex
MaterialBrass and Metal
Country of OriginMade in India
ShapeRectangle
Surface FinishPolished
Thickness10-20 mm
Model Name/NumberVSLIC-B127
About Product :
For casting of cement briquettes for tensile strength tests. It is a two part split mould made of gun metal. Two thumb screws facilitate easy and quick assembling and dismantling of the mould.

A set of three moulds as per IRC-SP-53-2002 made of brass /gunmetal with the shape, dimensions and tolerances.
The ends B & B` are known as clips, and the parts A & A'' are known as sides of the mould. The dimensions of the mould
shall be such that when properly assembled it will form a briquette specimen having the following dimensions.
Total length : 75 ± 0.5 mm

Specifications :
Brand : Vertex
Material : Gun Metal
Briquttes Cast :  25.4mm x 25.4mm
Application : Tensile Strength Test
Base Plate : Steel
Minimum Quantity : 01

 

Additional Information:

  • Item Code: VSLIC4027
  • Delivery Time: 1 Week
Get Best QuoteRequest Callback
Bitumen PRD Mould

Bitumen PRD Mould

Product Price: Rs 6,500 / SetGet Best Price

Product Details:
Usage/ApplicationIndustrial
MaterialSteel
BrandVertex
ShapeRound
Country of OriginMade in India
Model Name/NumberVSLIC-B133
This mould, vertically split on one side, foreseen of clamp attached to the base plate, plated against corrosion, is utilized for determining the degree of compaction of bituminous pavements, for quality control purpose.

Product Features
  • Used For Bitumen.
  • Easy To Maintain.


Additional Information:

  • Item Code: VSLIC-B133
Get Best QuoteRequest Callback
Bitumen Testing Equipment Repairing Service

Bitumen Testing Equipment Repairing Service

Product Price: Rs 1 / SetGet Best Price

Product Details:
MakeVertex
Frequency50 Hz
Display TypeDigital
Voltage210 V
Power SourceElectric
Due to opulent industry expertise and practice, we are proficient to render Bitumen Testing Equipment Repairing Service to our patrons. Our services are accomplished by industry proficient experts who have prosperous acquaintance and proficiency. In these services, experts employ advanced techniques to render this service as per patron’s demand.

Additional Information:

  • Delivery Time: 1 Week
Get Best QuoteRequest Callback
Say Bolt Two-Tube Digital Viscometer

Say Bolt Two-Tube Digital Viscometer

Product Price: Rs 1 / SetGet Best Price

Product Details:
Model Name/NumberVSLIC-B120
BrandVertex
Usage/ApplicationLaboratory
FeaturesAutomatic timing option for simplified,accurate measurement of efflux times.
Country of OriginMade in India
For the empirical measurement of Saybolt Viscosity of petroleum products at specified temperatures between 70°F and 210°F. This is also used for determining the Say bolt Furol viscosity of bituminous materials at temperatures of 250, 275, 300, 350, 400 and 450°F.
It comprises one each of Cylindrical Oil Cup, Universal Tip, Furol Tip, Bath fitted with immersion heater mounted on a stand, Dimmer stat for temperature control, Stirrer with shield. Apparatus is supplied complete with insulated handle and thermometer support, receiving flask, withdrawal tube, filter funnel, thermometer support for cup and circular spirit level.
Features
  • Microprocessor control of temperature between ambient and 240°C (464°F).
  • Two tube capacity.
  • Dual digital displays show setpoint and actual temperature.
  • Selectable temperature scale – Celsius or Fahrenheit.
  • Automatic timing option for simplified, accurate measurement of efflux times.
  • Conforms to ASTM D88, D244, E102, and related specifications.


Additional Information:

  • Item Code: VSLIC-B120
Get Best QuoteRequest Callback
Fraass Breaking Point

Fraass Breaking Point

Product Price: Rs 1 / SetGet Best Price

Product Details:
Model Name/NumberVSLIC-B103
BrandVertex
FeaturesA Stainless Steel Plaque.
I Deal InNew Only
Country of OriginMade in India
The Frass Breaking Point is the temperature at which bitumen first becomes brittle, as indicated by the appearance of cracks when a thin film of the bitumen on a metal plaque is cooled and flexed in accordance with specified conditions.The apparatus consists of stainless steel plaque, cooling and bending apparatus, thermometer IP 42C (-38°C/+30°C), plate and stand.
Features
  • Fraass Breaking Point Apparatus.
  • A Stainless Steel Plaque.
  • Frass Apparatus (pack of 10) Dry ice maker.


Additional Information:

  • Production Capacity: VSLIC-B103
Get Best QuoteRequest Callback
Cleaveland Flash Point

Cleaveland Flash Point

Product Price: Rs 1 / SetGet Best Price

Product Details:
Usage/ApplicationConstruction Laboratory
BrandVertex
Model Name/NumberCleaveland Flash Point
ShapeSquare
FeaturesSuperior finish.
The material is filled in the cup up to a filling mark the lid placed to close the cup in a closed system all accessories including thermometer of the specified range are suitably fixed the bitumen sample is then heated.
The test flame is lit and adjusted in such a way that the size of a bleed is of 4 mm diameter the heating is done at the rate of 5 degree c to 6 degree c per minute the stirring is done at a rate of approximately 60 revolutions per minute the test flame is applied at intervals depending upon the expected flash and fire points first application is made at least 17 degrees c below the actual flash point and then at every 1 degree c to 3 degrees c the stirring is discontinued during the application of the test flame.
Features
  • Cup fitting handle.
  • Cup cover with test flame and shutter mechanism..
  • Thermometers.
  • Heat element.
  • Long life.
  • Superior finish.
  • Easy to operat.
Get Best QuoteRequest Callback
Traveling Beam Device

Traveling Beam Device

Get Latest Price

Product Details:
Girder TypeSingle
BrandVertex
Model Name/NumberVSLIC-B129
Max Load Capacity5-10 ton
Travel Speed5-10 m/min
Span10-20 m
Country of OriginMade in India
Travelling Beam Device with Autographic Recorder Supplied Without Recorder Charts.
The 3 metres long Travelling Beam Device is used to check for any irregularities in both concrete and bituminous road surfaces. A sensing unit comprising a wheel connected to an indicator provides a magnification of 4:1.
Deviation of the surface from a straight-line is shown on a scale calibrated in increments of 2 mm up to 10 mm and 5 mm up to 25 mm. A dye-marker is fitted which may be used to identify suspect areas. Outrigger wheels provide mobility on site. The device is supplied as three sub-assemblies which are quickly assembled on site. The Travelling Beam is supplied fitted with an autographic recorder providing a permanent record of the surface profile. Records up to 1 kilometer can be recorded on the special chart paper rolls used.
Product Features
  • Beam length: 3 m.
  • Scale: 2 mm increments up to 10 mm; 5 mm increments from 10 to 25 mm.
  • Max vertical deviation: ± 25 mm.
  • Weight approx.: 55 kg.


Additional Information:

  • Item Code: VSLIC-B129
Get Best QuoteRequest Callback
Single Briquette Mould

Single Briquette Mould

Product Price: Rs 1 / SetGet Best Price

Product Details:
ColorYellow
BrandVertex
MaterialCustomize
UsageIndustrial
Single Briquette Mould for Cement Testing – casting of cement briquettes for tensile strength tests. It is a two-part split mould made of gunmetal. Two thumbscrews facilitate easy and quick assembling and dismantling of the mould. The minimum cross-section of the briquettes cast is 25.4 mm x 25.4 mm. Supplied complete with a steel base plate.

Get Best QuoteRequest Callback
Marshall Stability Test Apparatus

Marshall Stability Test Apparatus

Product Price: Rs 55,000 / SetGet Best Price

Minimum Order Quantity: 1 Set

Product Details:
ColorBlue
MaterialMild Steel
Automation GradeAutomatic
Capacity50kN
Power SupplyElectric
Voltage230v
PhaseSingle Phase
Compaction Hammer2 No.
Model NumberVSLIC-B122
BrandVertex
About Product :
Originally developed by Marshall Stability and Compaction Apparatus, a highway engineer in U.S.A later on standardized by ASTM. Generally, the test is applicable to hot mix designs using bitumen and aggregates upto a maximum size of 25 mm. In this method, the resistance to plastic deformation of a cylindrical specimen of a bituminous mixture is measured when the same is loaded periphery at 5 cm per min. This test procedure is used in designing and evaluating bituminous paving mixes. The test procedure is extensively used in routine test programmes for paving jobs There are two major features of the Marshall method of designing mixes namely. The Marshall stability of mix is defined as a maximum load carried by a compacted specimen at a standard test temperature of 60 deg.C. The flow value is deformation the Marshall test specimen undergoes during the loading upto the maximum load, in 0.25 mm units. In this test, an attempt is made to determine optimum binder content for the type of aggregate mix and traffic intensity. The apparatus consists of 1. A loading unit motorized, capacity 5000 kgf with two telescopic pillars and an adjustable crosshead Limit switches are fitted inside to control upward or downward movement of the pillars. On off reversing switch and indicator lamps are on the front side while a hand wheel to manually move the pillars minute operated on 230 Volts A.C.

Marshal Stability Consist Of :

  • 01 No. - Marshal Load Frame.
  • 01 No. - Breaking Head Stability Mould, with a Dial Gauge ( Having 25mm travel and 0.01mm least count), for Flow Measurement.
  • 03 No. - Compaction Mould, Steel Cylindrical.
  • 03 No. - Base Plate.
  • 03 No. - Extension Collar.
  • 01 No. - Compaction Pedestal , Manual Operation, Comprising a steel Plate Capped on a Wooden Post. A Mould Clamp is fitted to the top of the Plate.
  • 02 No. - Compaction Hammer, satisfies BS 598. The Hammer has a 4535g sliding weight with a free fall of 457mm.
  • 01 No. - Load Transfer Bar.
  • 01 Pkt. - Paper Discs, Non Absorbent, 11cm diameter pack of 100 No.
Specification :
  • Brand : Vertex
  • Material : Mild Steel (Body)
  • Automation Grade : Automatic
  • Voltage : 230V
  • Phase : Single Phase
  • Frequency : 50Hz
  • Surface Treatment : Paint Coated
  • Power Source : Electric
  • Compaction Hammer : 5.43 kg
  • Drop Height : 457mm
  • Size : Upto 25mm
  • Flow Meter : 0.01mm x 25mm
  • Rate Of Travel : 50.8mm/min
  • Temperature : 60 deg. C
  • Capacity : 2500kg
Other Details :
  • Model Number : VSLIC-B122
  • Delivery time : 1 Week or Depends on the Distance.


Additional Information:

  • Item Code: VSLIC-B122
  • Delivery Time: 1 Week or Depend on the Distance
Get Best QuoteRequest Callback

EXPLORE MORE CATEGORIES

Looking For "Bitumen and Asphalt Testing Equipment"?
Thank youYour Enquiry has been sent successfully.
© Vertex Scientific And Lab Instruments Co. All Rights Reserved (Terms of Use)Developed and managed by IndiaMART InterMESH Ltd.